Overview
The Skyjacker Softride SE30T is a red front spring bushing kit built from polyurethane. It is designed for the leaf spring ends and gives a smooth, quiet alternative to worn bushings.
No vehicle is named, and the universal fit label does not confirm a match, so compare the bushing to your spring design before choosing it.
Key features
- Red color
- Front position
- Polyurethane bushings
- Non-greaseable design
Matching a bushing to the spring
A spring bushing sits at the eye of a leaf spring and cushions the pivot as the spring flexes. Its size and shape need to match the eye diameter and the mounting hardware, so measure the existing bushing or the spring eye before ordering. A bushing that is too small will rattle, and one that is too large can bind when the spring is loaded.
Front springs see a lot of movement, so the bushing sees steady wear. Polyurethane resists oil and tearing, but it still wears when sand and grit get into the pivot. Clean the spring area after trail use, check the pin for scoring, and replace the bushing when it cracks, flattens or lets the spring shift. When replacing spring bushings, check the shackle and pin at the same time, since worn parts often go together.
- Measure the spring eye before ordering
- Check pins and shackles during replacement
- Clean grit from the pivot after trail use
- Replace bushings that crack or flatten
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SE30T |
| UPC | 803696158471 |
| Color | Red |
| Position | Front |
| Material | Polyurethane |
| Greasing | Non-greaseable |
Vehicle fitment
Fitment is universal, so no specific vehicle is tied to this bushing. Compare it to your spring design and confirm the match for your year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is a spring bushing kit. Check the package contents against your installation before starting.








