Overview
The Crown Automotive J5352659 is a rear leaf spring bushing that sits at the front eye of the rear spring, for the driver or passenger side. It is a direct fit for the 1974–1975 Jeep CJ5 (Base, Renegade) and CJ6 (Base).
It is a rear position bushing with a width of 2 – 3/64 inch.
Key features
- Front eye of the rear leaf spring
- Driver or passenger side
- Stated width of 2 – 3/64 inch
- Direct fit for the vehicles covered below.
- Part number J5352659, UPC 848399063042
Rear spring eye bushings
The front eye of a rear leaf spring pivots as the axle moves, so its bushing takes steady side-to-side and fore-aft loads. When the rubber wears, the rear end can wander, and the spring may knock as the axle cycles over bumps. A loose eye can also shift the spring’s position, which affects how the rear of the vehicle tracks.
Before fitting a new bushing, inspect the spring eye, the pin and the frame hanger for wear. Clean the pin thoroughly and use a press or bushing tool so the new part goes in square. On older CJs, rust around the mounts is common, so check the surrounding hardware while the spring is accessible.
- Check the spring eye and pin for wear before fitting
- Inspect frame hangers for rust or cracks
- Press the bushing in square to avoid binding
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5352659 |
| UPC | 848399063042 |
| Position | Rear |
| Location | Front eye of rear leaf spring |
| Side | Driver or passenger |
| Width | 2 – 3/64 inch |
| Fitment type | Direct Fit |
Vehicle fitment
It fits 1974–1975 Jeep CJ5 (Base, Renegade) and 1974–1975 Jeep CJ6 (Base) models.
Other CJ generations and Wrangler models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Hardware contents are not confirmed, so check your installation requirements before starting.









