Overview
The Skyjacker Softride Spring Bushing Kit, red, part number SE12D, is a set of polyurethane bushings for the front springs of a vehicle. The bushings are designed to keep the springs articulating smoothly and quietly. The kit carries a universal fit label, and no vehicle is named for it.
Key features
- Polyurethane bushing construction
- Non-greaseable design
- Red finish
- Front position
Polyurethane bushings in service
Polyurethane bushings are firmer than rubber and resist oil and heat well, which is why they are common on spring ends. They do not absorb as much vibration as rubber, so the ride may feel a little firmer over rough ground. Their hardness also means they can squeak or bind if the spring eye is out of round or the mounting hardware is worn.
Because this kit is non-greaseable, the service routine is inspection rather than lubrication. Look for cracks, chunking, flattened sections or a loose fit in the spring eye. Check for metal-to-metal contact or excess play at the bushing, and replace the set if it shows damage. Clean grit and mud from the spring area after off-road use, since trapped debris speeds wear on any bushing.
- Inspect for cracks and flattened sections
- Look for play or metal-to-metal contact
- Clean debris from spring areas after trail use
- Replace worn sets rather than shimming
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SE12D |
| UPC | 803696158389 |
| Product line | Softride |
| Type | Spring bushing kit |
| Material | Polyurethane |
| Greaseable | No, non-greaseable |
| Color | Red |
| Position | Front |
Vehicle fitment
Fitment is universal, and leaf spring bushings are sized to particular spring and axle setups. Check the spring and axle against your vehicle’s year, make, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is a spring bushing kit. Check the package contents against your installation before starting.









