Overview
The Skyjacker 9240 is a dual steering stabilizer kit from the Hydro Series for the front steering of Ford trucks and SUVs. It is designed to restrain bump steering and front-end vibration. It is a stabilizer only and a direct fit, so it works alongside existing steering and suspension parts.
It fits the Ford Bronco, Bronco II, Explorer, F-100, F-150, F-250 and F-350 in the model years covered in the fitment section. The kit includes a black polyurethane shock boot that protects the stabilizer from on-road and off-road conditions.
Key features
- Dual kit configuration.
- Designed to restrain bump steering and front-end vibration.
- Black polyurethane shock boot included
- Silver stabilizer finish with black boots
- Hydro Series stabilizer, stabilizer-only design
- Direct fit for the Ford vehicles covered in the fitment section
Front steering maintenance
Bump steering and front-end vibration often trace back to worn tie rod ends, loose pitman arms or tired steering bushings. A stabilizer adds damping to the front steering, but it works best when those parts are tight. Before fitting the kit, check the steering linkage for play and replace any worn ends.
Ford trucks and Broncos differ in their front axle and steering layouts, so mounting points vary by model and year. Measure the clearance around the stabilizer ends and confirm the bracket pattern against your frame. Keep the steering wheel centered when you set the new unit, and check for binding through full lock.
Stabilizers collect road dirt, so the shock boot is the main protection for the piston rod. Inspect the boot after off-road trips, and wipe the rod clean before storing the truck. A torn boot lets grit into the seal and leads to early wear on the unit.
- Check tie rod ends and pitman arm for play
- Center the steering before setting the stabilizer
- Inspect the shock boot after off-road use
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 9240 |
| UPC | 803696213255 |
| Product type | Steering stabilizer kit |
| Configuration | Dual |
| Series | Hydro Series |
| Type | Stabilizer only |
| Finish | Silver with black boots |
| Shock boot | Black, included |
| Brackets | Ford Bronco from 1980 to 1996, Bronco II from 1986 to 1990, Explorer from 1991 to 1994 including Explorer Sport, F-100 from 1980 to 1983, F-150 in 1975 to 1976 and 1980 to 1996, F-250 from 1980 to 1998, F-250 HD in 1997, and F-350 from 1980 to 1997. Trim levels vary by model, so check the trim breakdown for your specific truck. |
| Mounting | The mounting does not use the original OEM location. |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list includes the Ford Bronco from 1980 to 1996, Bronco II from 1986 to 1990, Explorer from 1991 to 1994 including Explorer Sport, F-100 from 1980 to 1983, F-150 in 1975 to 1976 and 1980 to 1996, F-250 from 1980 to 1998, F-250 HD in 1997, and F-350 from 1980 to 1997. Trim levels vary by model, so the Fitment tab has the full trim breakdown.
Ford models not named here are not covered, and neither are model years outside these ranges. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the box contents against your installation before starting. Brackets are not included, so a separate purchase is needed if they are missing. Stabilizer work sits at the front steering, so support the front end on stands and never work under a vehicle held only by a jack.
What’s included
The kit includes a black polyurethane shock boot and the silver stabilizer body. Brackets are not included.
Not included: Brackets are not included. Confirm the box contents before installing.









