Overview
The Skyjacker BP30 is a bump stop bracket for leaf spring accessories. Bump stops limit excessive axle travel, which keeps the tires from reaching the fender wells and the axle tube from contacting the vehicle frame.
Vehicle years, makes and models are not identified for this bracket, so confirm fit before ordering.
Key features
- Limits excessive axle travel
- Helps keep tires clear of fender wells
- Keeps the axle tube off the vehicle frame
- Direct fit listed
- Skyjacker part number BP30
Bump stops and axle travel
A bump stop works as a limit on how far the axle can move up toward the frame. Without one, a leaf spring can compress far enough for the tires to rub the fender or for the axle tube to strike the frame or a crossmember. A bracket gives the stop a secure mount so it stays in the right place under repeated compression.
Rubber bump stops age and crack, especially in sun and cold, so inspect them along with the bracket welds and fasteners. Changing ride height or spring rate changes how often the stop is reached, so check clearance again after any suspension work. Keep the bracket free of mud packed around the mounting area, since trapped debris can hold moisture against the metal.
- Inspect the stop for cracks or flattening
- Check welds and bolts for looseness
- Recheck tire clearance after suspension changes
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | BP30 |
| Type | Bump stop bracket |
| Category | Leaf spring accessories |
Vehicle fitment
Skyjacker lists direct fit for this bracket, but no vehicle years, makes or models are named, so the bracket cannot be matched to a specific vehicle from these details.
Confirm fit for your vehicle’s year, model and trim before ordering. Check the mounting points against your leaf spring setup before installing.
What’s included
Check whether a bump stop is needed separately before starting the installation.









