Overview
The Simpson Racing Vortex Rear Seat in Lt. Blue, part number 102-317, is the light blue version of the Vortex rear seat. It combines high containment with a cutaway lower bolster for entry and exit.
The Vortex uses a tube-style frame and a laser-cut seat base that accepts different mounting rails. It is designed to work with the factory slider without raising the seat height.
Key features
- Lt. Blue finish
- High containment design
- Cutaway lower bolster
- Designed for the factory slider
- Tube-style frame
Choosing rails and seat position
Seat position and mounting are closely linked. Rails set the height, fore-aft position and angle of the seat, so the choice of rail affects how close the driver sits to the wheel and pedals. Before fitting, check that the seat clears the door, harness and any roll cage bars, and that it does not interfere with the factory slider’s travel.
Bolster design matters for side support. A cutaway lower bolster makes getting in and out easier, but a deeper bolster holds the body more firmly in corners. Consider how the seat will be used, and keep the mounting hardware torqued and inspected after the first few trail runs, since rails and brackets can loosen under vibration.
- Match rails to the seat base before buying
- Check clearance to doors and harness mounts
- Re-torque mounting hardware after the first outings
Specifications
| Brand | Simpson Racing |
|---|---|
| Part number | 102-317 |
| Color | Lt. Blue |
| Frame | Tube-style |
| Seat base | Laser-cut |
| Factory slider | Seat height not raised |
Vehicle fitment
Check compatibility with the factory slider before ordering, since that is the main fit point for this seat.
Confirm your vehicle’s year, model and trim before ordering. Check the mounting rail set against your vehicle’s seat location.
What’s included
The seat in Lt. Blue, part 102-317.
Not included: The mounting rails that attach to the seat base.









