Overview
The PRP Pro XP 2 Door Front Seat Mount Kit, part number PRPC71, adapts PRP UTV seats to the factory seat slider of a 2-door Polaris RZR PRO XP. It fits the 2020-2021 RZR PRO XP.
The adapters attach to the bottom of the PRP seat and reuse the stock bolts and nuts. PRP says they give a firmer base than the stock plastic release clips. The 2-door passenger seat is fixed while the driver seat slides, so this kit’s adapters differ from the 4-door kit, which is a separate part.
The C71 adapts the factory seat slider to the bottom of a PRP UTV seat. The adapters give a more secure and solid base than the stock plastic release clips, and the kit reuses the stock bolts and nuts to connect to the vehicle.
The 2-door PRO XP’s driver seat slides while the passenger seat is fixed, and the adapters are built for that layout. Minor adjustments are needed on the 2-door passenger seat when a Click 6 harness is fitted. The kit includes the hardware to attach the adapters to the seats.
Key features
- Two driver-side and two passenger-side adapters
- Reuses the stock bolts and nuts
- Firmer base than the stock plastic release clips
- Works with Click 6 harnesses, with minor adjustment on the 2-door passenger seat
- Requires PRP UTV seats with a flat strap seat frame
Checking seat frame compatibility
A seat mount kit is only as good as the match between the seat frame and the vehicle’s factory slider. Before you order, confirm the seat frame type, since a flat strap frame is what the adapters are built to accept. Frames designed for a different layout will not seat correctly on the slider.
Once the kit is in hand, test the fit before final tightening. Seat sliders, harness routing and the seat’s bottom mounts should line up without forcing the seat. Harness buckles can catch on a fixed seat, so route the belt and check clearance on the passenger side after installing.
Seat hardware can work loose over time, so recheck the bolts and adapters after the first drives.
- Verify the seat frame type
- Test fit before final tightening
- Recheck bolts after initial drives
Specifications
| Brand | PRP Seats |
|---|---|
| Part number | PRPC71 |
| Kit contents | Two driver-side adapters, two passenger-side adapters, hardware |
| Seat frame | Flat strap seat frame |
| Not compatible | RZR 1000 seat frames |
| Door configuration | 2 door |
| Fitment | Direct fit for the 2020-2021 RZR PRO XP |
Vehicle fitment
It fits the 2020-2021 Polaris RZR PRO XP 2-door models. 4-door PRO XP vehicles use a different kit.
The kit won’t work with RZR 1000 seat frames. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two driver-side adapters, two passenger-side adapters and the hardware to attach them to the seats. The PRP UTV seats themselves are not included, and they must have a flat strap frame.










