Overview
The PRP Seats 4.2 harness, part number PRPSBAUTO2, is a black 2-inch, 4-point seat belt harness with an automotive-style latch, made for a Jeep or a UTV.
The automotive-style latch is designed for quick entry and exit on the trail. The harness has sewn-in pads for comfort, black hardware and quick adjusters on the shoulder straps.
Key features
- 2-inch, 4-point seat belt design
- Sewn-in pads for comfort
- Quick adjusters on the shoulder straps
- Automotive-style latch
- All black hardware
Anchor points and seat belt use
A harness is only as strong as the points it bolts to. Four-point harnesses are meant to hold the occupant in place during hard braking or a rollover, so the anchors, seat frame and mounting hardware all need to be sound. Look for bent brackets, cracked welds and loose bolts before every outing, especially after rough trail use.
Sewn-in pads and quick adjusters make the harness easier to live with, but they do not change its job. Keep the straps out of the buckle area when entering, and avoid twisting the webbing. Replace any harness that shows fraying, cuts or UV damage, since webbing wears as it ages.
- Check anchor points for cracks and loose hardware
- Keep webbing clear of sharp edges
- Clean dirt from the adjusters to keep them working
- Replace webbing that shows fraying or cuts
Specifications
| Brand | PRP Seats |
|---|---|
| Part number | PRPSBAUTO2 |
| Color | Black |
| Webbing width | 2 inches |
| Points | 4-point |
| Shoulder adjusters | Quick adjusters |
| Latch | Automotive style |
| Pads | Sewn in |
Vehicle fitment
It is made for a Jeep or a UTV. Confirm your vehicle’s year, model and trim before ordering, since model years and chassis codes are needed to check a specific match.
Confirm your vehicle’s year, model and trim before ordering, and check the seat and mounting points on your machine.
Installation notes
Four-point harnesses need anchor points that can take their load. Check the mounting points on your machine against the harness before fitting it.









