Overview
The Scosche MagicGrip Double-Pivot Suction Cup Wireless Charging Phone Mount (part number MGQWD-XTET) is a dashboard phone mount that grips your phone automatically and charges it wirelessly. It attaches with a reusable suction cup base to a dashboard, window or any flat surface, and it charges Qi-enabled phones, including iPhone and Android models.
Place your device near the MagicGrip charging coil and the arms close to hold it and start charging. Pull the device away from the coil and the arms open again. It is a universal-fit mount, built for no single make, model or year of vehicle.
Key features
- Wireless charging of any Qi-enabled device at up to 10-Watts, without a charging cable plugged into the device.
- Automatic sensing: the arms close around a device placed near the charging coil and open when it is pulled away.
- Foreign object detection, so charging activates only when nothing is obstructing that area.
- Reusable stick grip suction cup base for a dashboard, window or any flat surface.
- 360 Degree adjustable ball joint that locks for secure positioning and viewing from almost any angle.
- Ambient light sensing LED ring that indicates charging and adjusts intensity in light and dark settings.
- Thermal management gap between the charging head and the device, letting heated air escape for cooler, safer charging.
- Accommodates devices up to 3.5 inches wide.
Mounting surface and heat
A suction cup holds best on smooth, clean plastic, glass or painted metal. Dust, oils and conditioner residue on a dashboard can reduce grip over time, so wipe the surface with a lint-free cloth before pressing the base down. Let the cup settle for a short period, then test it gently before driving. Cups on sun-warmed dashboards can soften and loosen, so check the hold after parking in direct sun.
Wireless charging produces some heat, especially on long drives or with a thick case that traps warmth. Keep the phone clear of any blocked airflow and avoid stacking magnetic accessories between the phone and the coil. If the phone stops charging, remove any obstruction and reseat it near the coil before troubleshooting further.
- Clean the mounting surface before each install
- Re-seat the cup if it starts to slip
- Remove thick or metal-plated cases if charging stops
Specifications
| Brand | Scosche Industries |
|---|---|
| Part number | MGQWD-XTET |
| Mounting location | Dash |
| Mounting type | Clamp |
| Color | Black |
| Device | Universal (Qi-enabled devices) |
| Maximum device width | 3.5 inches |
| Charging power | Up to 10-Watts |
| Ball joint | 360 Degree adjustable |
| Charging indicator | Ambient light sensing LED ring |
Vehicle fitment
It is a universal-fit mount with no specific year, make, model or trim. It attaches to a dashboard, window or flat surface, so it is not tied to any one vehicle.
Confirm fit for your vehicle’s year, model and trim before ordering. Check that your mounting surface is clean and flat before attaching the suction cup.
Installation notes
Press the suction cup base onto a clean, flat dashboard, window or similar surface, then set the 360 Degree ball joint to the viewing angle you need. For iPhone 11 devices, place the MagicPlates outside your case or between the phone and case. Keep the charging area clear, since charging only activates when nothing is obstructing it.
What’s included
Check the package contents against your installation before starting.












