Overview
The OBD290Y splitter, part number SIIOBD290Y, adds two OBD-II ports to a vehicle’s diagnostic connector, with a 90-degree angled plug for compact wire routing. It is universal fit for vehicles with an OBD-II interface.
Once it is plugged in, the splitter reads from the vehicle’s electronic control unit (ECU) and lets additional devices connect at the new ports. Scosche says these include heads-up displays, diagnostic readers, tuning modules, insurance devices and GPS units. Scosche backs the splitter with lifetime tech support and a limited lifetime warranty.
Key features
- 90-degree angled OBD-II plug
- Two additional OBD-II ports
- Included wire routing accessories for mounting the new ports
- Black finish, about 4 inches long
- Limited lifetime warranty
Before you plug in a splitter
An OBD-II splitter gives a second connection on the same diagnostic port, so the vehicle’s electronic control unit now supplies power and data to more than one device. Before adding a splitter, look at what each device draws from the port. Heavier devices, such as tuning modules, can affect the battery when the engine is off, while a simple reader draws very little. Plan which devices stay connected all the time and which are plugged in only when needed.
Routing matters as much as the device. Use the included wire routing accessories to secure the cable away from the pedals, the steering column and any moving parts under the dash. A loose cable can catch or be pulled during service, so a neat run is worth the few minutes it takes.
- Check each device’s power draw
- Secure the cable away from the pedals
- Unplug non-essential devices when the vehicle is parked
Specifications
| Brand | Scosche Industries |
|---|---|
| Part number | SIIOBD290Y |
| Model | OBD290Y |
| Color | Black |
| Length | 4 in |
| Plug | 90-degree angled OBD-II |
| Additional ports | Two OBD-II |
| Device | Universal |
| Warranty | Limited lifetime |
Vehicle fitment
This splitter is not vehicle-specific. It works with most vehicles that have an OBD-II interface. Confirm your vehicle has a standard OBD-II port before installing.
Installation notes
Plug the angled end into the vehicle’s OBD-II port. The included wire routing accessories help secure the wiring so the new ports can be mounted in a convenient location. The 90-degree angled plug is intended for compact wire routing, which keeps the cable tidy at the port.
What’s included
The OBD-II splitter with its included wire routing accessories.
Not included: the diagnostic readers, heads-up displays, GPS units and other devices that connect to the extra ports.









