Overview
The S&B Filters Cold Air Intake with Cleanable Filter, product number 75-5096, is a cold air intake kit for the 2016-2017 Toyota Tacoma with a 3.5L engine. It replaces the stock intake with a cold air setup built around a cotton, oiled filter that can be cleaned and oiled again rather than replaced. The kit delivers 43.83% more airflow than the stock intake.
The kit is built with premium silicone rubber for its seals, couplers, air box plug and air inlet scoop. The silicone is designed for tear strength and flexibility for a secure fit, and it handles extreme temperatures. The optional air box plug and air inlet scoop can be swapped depending on the airflow you need. The kit is designed to avoid check engine lights when the Mass Air Sensor is properly mapped, and it runs with either stock calibration or enhanced tuning.
Key features
- Cotton, oiled filter that can be cleaned and reused
- Listed at 43.83% more airflow than the stock intake
- Filter listed at 99.19% efficient at 297 CFM
- Premium silicone seals, couplers and plug with exceptional tear strength
- Silicone handles extreme temperatures and flexes for a secure fit
- Optional air box plug and air inlet scoop, interchangeable for different airflow needs
- Designed to avoid check engine lights with a properly mapped Mass Air Sensor
- Install time listed at less than 60 minutes
Keeping the air path sealed
A cold air intake is only as good as its seals. Silicone couplers flex with engine movement and heat cycles, so the connections at the throttle body and the air box are the first places to check after the install. A loose coupler can let unfiltered air in, which can wear the engine and disturb the Mass Air Sensor reading.
Cotton oiled filters need a different routine than paper filters. Clean the filter, let it dry completely, then apply a light, even coat of filter oil before reinstalling it. Too much oil can drift onto the sensor, so wipe away any excess. When choosing between the optional air box plug and inlet scoop, think about the driving you do most, since that decides which setup suits you better.
- Check silicone couplers for splits at each service
- Clean and re-oil the filter only when it looks dirty
- Keep the Mass Air Sensor clean and dry
Specifications
| Brand | S&B Filters |
|---|---|
| UPC | 841372036972 |
| Engine | 3.5L |
| Intake type | Cold air |
| Filter housing type | Full enclosure |
| Filter type | Cotton, oiled, cleanable |
| Inlet tube | Included |
| Airflow | 43.83% more than the stock intake |
| Filtration efficiency | 99.19% at 297 CFM |
| Seals and couplers | Premium silicone rubber |
| Optional parts | Air box plug and air inlet scoop, interchangeable |
Vehicle fitment
The kit is a Direct Fit for the 2016-2017 Toyota Tacoma with a 3.5L engine.
Other Tacoma model years and engine options are not covered. Verify your year, model and engine before ordering.
Installation notes
Install time is listed at less than 60 minutes. Keep the Mass Air Sensor connected and undamaged during the install, since the kit is designed around a properly mapped sensor. Disconnect the battery before working in the engine bay.
What’s included
The inlet tube is included. The optional air box plug and air inlet scoop are interchangeable options.
Not included: Check the package contents against your installation before starting the install.




















