Overview
The Rugged Ridge 11651.05 is a set of black plastic Body Armor rocker guards for 4-door 2007–2018 Jeep Wrangler Unlimited (JK) models.
Each Body Armor piece is built from black diamond-plate-look, UV treated thermoplastic. The pieces attach with 3M automotive grade tape and bolts. Most of the installation requires no cutting or drilling, though the front guard may need some under hood drilling. Body Armor can cover a scratch or dent once the area is filled in with touch-up paint to prevent rust.
Rugged Ridge also says Body Armor can cover a scratch or dent once the area is filled in with touch-up paint to prevent rust.
Rocker guards protect the lower body sill from rocks, brush and trail damage, and the plastic pieces also give the vehicle an off-road look. Because they attach with tape and bolts rather than welding or drilling in most places, they can be fitted without altering the body, apart from the possible drilling for the front guard noted above.
The guards are 3 3/4 inch wide, so check that the width and the sill area suit how you use the vehicle.
Key features
- Black diamond-plate-look UV treated thermoplastic
- Plastic guard that gives an off-road look
- Attaches with 3M automotive grade tape and bolts
- 3 3/4 inch wide
- For 4-door models
- No cutting or drilling required
Rocker guard fitting tips
Rocker guards sit on the lower sill, where rocks, brush and trail debris strike first. A guard that is clean, flat and firmly attached protects the paint behind it better than one that is loose. Before fitting, measure the sill and confirm the guard width suits the body line and your clearance at the doors.
Mixed tape and bolt mounting works best when each step is done in order. Clean the sill thoroughly, dry-fit the guard, then mark any bolt holes before tightening. After the first trips, re-check the bolts and the tape at the ends, and clean off mud before it hardens. A quick inspection after rough trail use catches small problems early.
- Dry-fit the guard before any tape is applied
- Mark bolt holes before tightening
- Re-check fasteners after the first trips
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11651.05 |
| UPC | 804314172176 |
| Product type | Rocker guards (plastic Body Armor) |
| Material | UV treated thermoplastic |
| Finish | Black plastic |
| Width | 3 3/4 inch |
| Vehicle body | 4-door models |
| Attachment | 3M automotive grade tape and bolts |
| Installation type | No cutting or drilling required |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Rugged Ridge 11651.05 covers the 2007–2018 Jeep Wrangler (JK) in the Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S and Unlimited X trims.
this product is for 4-door Unlimited models only, so it does not cover 2-door Wrangler JK models or other Wrangler generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Follow the installation steps carefully. Torque any fasteners to the specified values and re-check them after the first few miles of driving. Clean and dry the surface before applying tape, and fill any scratched areas with touch-up paint first to help prevent rust.
What’s included
- Black plastic rocker guards









