Overview
The Rugged Ridge 11352.01 is a smoke hood air scoop for the 1987-1995 Jeep Wrangler YJ, 1998-2006 Wrangler TJ and 2004-2006 Wrangler Unlimited LJ. It mounts with double-sided automotive-grade tape and requires no drilling. It is designed to help increase the efficiency of the heater and air conditioner.
The finish is smoke. The main installation points are tape mounting and no drilling, with a clean, dry surface needed for the bond.
Key features
- Smoke finish
- Double-sided automotive-grade tape mounting
- No drilling required
- Fits YJ, TJ and LJ Wrangler models
Tape-mounted scoops and surface prep
A tape-mounted scoop depends on the bond between the tape and the hood surface. Good preparation matters more than the tape itself. Wipe the hood area with a degreaser, let it dry fully, and avoid touching the adhesive side once it is exposed. Warm conditions help the tape grip, while cold surfaces can slow the bond.
After mounting, give the bond time to set before washing the car or driving at speed. Inspect the edges after the first few drives and after heavy rain, since lifted corners let water and grit under the tape. A hood scoop also works best when the hood closes evenly, so check the latch and the clearance once the scoop is in place.
- Degrease the hood area before mounting
- Let the bond set before washing
- Check edges and hood latch clearance
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11352.01 |
| UPC | 804314116286 |
| Finish | Smoke |
| Mounting method | Double-sided automotive-grade tape |
| Drilling | Not required |
| Manufacturer fitment label | Direct Fit |
Vehicle fitment
It fits three Wrangler generations: YJ from 1987 to 1995, TJ from 1998 to 2006 and LJ (Unlimited) from 2004 to 2006. Trims run from Base through Sport on YJ models, include Rubicon and X on TJ models, and include Unlimited Rubicon on LJ models.
The JK and JL generations are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rugged Ridge specifies double-sided automotive-grade tape and no drilling. Tape bonds depend on a clean, dry mounting surface, so clean the hood area before pressing the scoop in place.
What’s included
Check the package for the tape and any other parts before installing.












