Select your vehicle

RotoPAX Universal Mounting Plate – RX-UP

RotoPAX

Shop RotoPAX Jerry Can on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Black powder coated universal mounting plate, model RX-UP
  • Measures 24 x 7 inches
  • For ATV or UTV racks and trailer walls
  • Base plate only, pack mounts not included

Description

Overview

The RotoPAX RX-UP is a black powder coated universal mounting plate, the base that holds RotoPAX pack mounts on an ATV or UTV rack or a trailer wall. It measures 24 by 7 inches.

The plate is the mount base only. Pack mounts are needed to hold the RotoPAX containers, and they are not included with the plate.

Key features

  • Black powder coated finish
  • Measures 24 x 7 inches
  • Suits ATV or UTV racks
  • Also mounts on a trailer wall
  • Base plate only

Mounting load and layout

A base plate carries the weight of every pack mounted on it, so the rack or trailer wall must be able to hold the full load. Before drilling or bolting anything, lay out the plate against the mounting surface and plan spacing for each pack mount. Use hardware matched to the plate and the wall, and check the joints after the first few trips.

On an ATV or UTV rack, vibration and rough ground are the usual causes of loosened fasteners. Recheck bolts regularly and look for cracks or rust around the mounting holes. On a trailer wall, consider how the packs sit relative to road spray, and keep the plate clear of moving parts.

  • Measure the mounting surface before drilling
  • Use fasteners rated for the load
  • Recheck mounting bolts after rough trips

Specifications

Brand RotoPAX
Model RX-UP
UPC 22099131878
Finish Black powder coated
Dimensions 24 x 7 inches
Mounting surfaces ATV or UTV rack, trailer wall

Vehicle fitment

Fit depends on your rack or trailer wall, so measure the mounting surface against the plate’s 24 by 7 inch size before fitting.

The plate is a base for pack mounts, so measure your rack or wall against its 24 by 7 inch size first.

Installation notes

Attach the plate to your rack or trailer wall before fitting the pack mounts. Confirm the rack or wall can carry the weight of the packs it will hold.

What’s included

The mounting plate is included.

Not included: pack mounts and the RotoPAX containers.

SKU: ROTRX-UP Category:

Specification

Shipping weight 4.00 lbs
Package dimensions 25.00 × 7.50 × 0.20 in
brands

Questions & Answers

Does the RX-UP fit a specific ATV or UTV?

It is not built for one specific vehicle. The plate suits ATV or UTV racks in general and trailer walls, so measure your rack before fitting.

Does the RX-UP come with pack mounts?

No. The plate is the mount base only. Pack mounts are needed to hold the RotoPAX containers and are a separate purchase.

What size is the RotoPAX RX-UP mounting plate?

It measures 24 by 7 inches. Measure your rack or wall against that size before ordering, and confirm the pack mounts you plan to use will attach to it.

How can I tell if a mounting plate needs replacing?

Replace the plate if it shows cracks, bent edges or heavy rust around the mounting holes. Loose or stripped fasteners that will not hold after retightening also mean the plate or wall needs attention before use.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop RotoPAX Jerry Can on Amazon