Overview
The Rock Hard 4×4 Parts RH-4006-F is a roller fairlead license plate bracket with a cabled lanyard for theft prevention. It clips onto the roller fairlead of an aftermarket bumper, so the front plate can be mounted without drilling.
The bracket is designed to fit standard roller fairleads and is made in the USA from stainless steel. Heavy duty steel clips hold the plate in place, and a firm tug releases it for winching, after which it hangs until pushed back into position.
Key features
- Heavy duty steel clips that clip onto the roller fairlead
- Cabled lanyard to deter theft of the front plate
- No drilling required
- Removed with a hard tug for winching, then hangs until pushed back into place
- Fits all standard roller fairleads
- Made in the USA
- Stainless steel construction
Roller fairlead basics
A roller fairlead guides the winch line through the bumper and is the point most often used to hold a front plate. Bumpers with a roller fairlead leave little room for a plate, so a clip-on bracket is a practical way to keep the plate in view while still using the winch.
Mounting on clips rather than bolts leaves the bumper unchanged. When the winch is in use, the plate can be pulled free and left hanging, then clipped back once the work is done. Trail dirt and mud can build up around the clips, so rinse them after rough outings. Keeping the lanyard attached means the plate stays with the vehicle if it comes loose on the trail.
- Inspect clips for cracks or bends
- Rinse off mud after off-road trips
- Check plate alignment before each drive
Specifications
| Brand | Rock Hard 4×4 Parts |
|---|---|
| Part number | RH-4006-F |
| UPC | 70000616608 |
| Material | Stainless steel |
| Mounting | Clips onto roller fairlead, no drilling |
| Fit | Standard roller fairleads |
| Theft protection | Cabled lanyard |
| Light | Not included |
| Origin | Made in the USA |
Vehicle fitment
The bracket is designed for the roller fairlead on a bumper rather than a specific truck, so it is a universal fit for standard roller fairleads. Confirm fit for your vehicle’s year, model and trim before ordering, and check that your fairlead is a standard unit.
Fit is not confirmed for non-standard roller fairleads.
Installation notes
No drilling is needed because the heavy duty clips attach to the roller fairlead. Pull firmly to remove the bracket for winching, and push it back into place when you are done.
What’s included
The license plate bracket with its steel clips and cabled lanyard.
Not included: a light, since the bracket is sold without one.


















