Overview
The Road Armor iDentity Headache Rack in bare steel, part number R/A3141DHRP-C1-MD, is a truck headache rack with provisions for auxiliary lighting. It fits 2014–2018 Chevrolet Silverado 1500 and GMC Sierra 1500 pickups, and 2015–2019 Silverado and Sierra 2500 HD and 3500 HD pickups.
A headache rack is the frame that mounts behind the cab at the front of the truck bed. Road Armor designed the iDentity version to accommodate many light combinations, from standard cube LEDs to light bars. Its narrow-profile mount and anchor bolts let the rack install with many bed covers, including the Truck Covers USA American Roll Cover and the BAKFlip MX4 cover, which use only 1 inch of the top bed rails for their mounting seal surface. This part is supplied in bare steel.
Key features
- Headache rack with supplemental lighting capability
- Accommodates cube LEDs, light bars and many other light combinations
- Narrow-profile mount that works with many bed covers
- Anchor bolts for a secure mount
- Compatible with covers that use only 1 inch of the top bed rails, such as the Truck Covers USA American Roll Cover and the BAKFlip MX4
- Supplied in bare steel, so finishing is left to the owner
- Direct-fit part for the trucks it covers
Lighting and wiring a headache rack
A headache rack gives a solid mount for lights, but the rack itself does not power them. Plan the light layout first, then decide where the switch, relay and fuse will sit. Keep wiring clear of the cab, the bed and any moving parts, and route the cable through existing grommets where possible.
Steel racks can rust where paint is missing, so seal bare spots early, especially around bolt holes and welds. After rough roads, check that bolts and light brackets are still tight, and inspect cable ties for chafing. These steps help the rack hold lights and bed covers securely over time.
- Fuse each light circuit close to the battery
- Use a relay to switch heavier light loads
- Prime and paint bare steel to slow rust
- Re-check anchor bolts after the first trips
Specifications
| Brand | Road Armor |
|---|---|
| Part number | R/A3141DHRP-C1-MD |
| Product type | Headache rack |
| Finish | Bare steel |
| Lighting | Designed to accommodate cube LEDs, light bars and other combinations |
| Bed cover clearance | Works with covers that use only 1 inch of the top bed rails for the mounting seal surface |
| Fitment type | Direct fit |
| Model code in title | 3141DHRP-C1-MD |
Vehicle fitment
The iDentity headache rack fits two truck families: the 2014–2018 Chevrolet Silverado 1500 and GMC Sierra 1500, and the 2015–2019 Silverado and Sierra 2500 HD and 3500 HD. That covers six model and year combinations.
It fits the 2014–2018 Silverado 1500 and Sierra 1500 and the 2015–2019 2500 HD and 3500 HD models only. Other model years, other generations, the Colorado and the Canyon are outside this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The narrow-profile mount and anchor bolts are intended to let the rack install alongside many bed covers. Lights are not part of the rack, so any LED cubes or light bars need their own wiring, ideally through a fused relay, and must follow local road-use rules.
What’s included
Check the package contents against your installation before starting. Lights, wiring and any bed cover are sold separately.
Not included: lights, light bars, wiring and any bed cover.










