Overview
The Aries Offroad Classic Headache Rack 111000 is a semi-gloss black steel cab rack for Chevrolet Silverado, GMC Sierra, Dodge Ram, Ram and Ford F-150 pickups.
A headache rack protects the rear window of a truck cab from loose cargo such as lumber or steel pipe. The Classic is built from 1″ x 2″ steel tubing with an E-coat and semi-gloss black powder coat finish, designed for heavy-duty hauling and trail use.
A cab rack like this suits trucks that regularly carry long cargo or trail gear. The Classic has a plainer look than angular styles: 1″ x 2″ rectangular steel tube, a louvered panel in the middle, and an E-coat under the semi-gloss black powder coat. The louvers protect the cab and cut some direct sun on the people inside. It mounts with flat steel brackets rather than a bed-rail clamp system and can sit alongside a crossover tool box. Models span several makes and years, so match both the model and the bed configuration.
Key features
- 1″ x 2″ steel tubing
- E-coat plus semi-gloss black powder coat finish
- Fully louvered center section that protects the cab and helps block direct sunlight
- Installs with heavy-duty flat steel brackets
- Compatible with crossover truck tool boxes, so truck bed functionality is maintained
- Direct-fit part for the listed pickups
Loading long cargo safely
A headache rack keeps long loads from shifting forward into the cab, but it does not hold cargo in place by itself. Use tie-down straps to secure lumber, pipe and other long items to the bed, and keep the heaviest loads low and centered. Check the load before each trip, since shifting cargo can strike the rack and the rear window.
Mounting brackets carry the rack’s load, so inspect them periodically for loose bolts, cracked welds or rust at the bracket. Tool box clearance matters when a crossover box sits in the bed alongside the rack. Check that the box opens fully and that the rack does not interfere with the lid or latches.
The louvered center section helps reduce direct sun on the cab’s interior, but it also catches wind. Expect some extra drag at highway speeds, and keep an eye on fuel use when hauling heavy, bulky loads.
- Secure long loads with tie-down straps
- Inspect brackets after rough trail use
- Confirm tool box clearance before installing
Specifications
| Brand | Aries Offroad |
|---|---|
| Part number | 111000 |
| Product type | Headache rack |
| Material | Steel tubing, 1″ x 2″ |
| Finish | E-coat with semi-gloss black powder coat |
| Center section | Fully louvered |
| Mounting | Heavy-duty flat steel brackets |
| Tool box compatibility | Compatible with crossover truck tool boxes |
| Fitment type | Direct fit |
Vehicle fitment
Fits these models by make, with model years as ranges: Chevrolet 2004–2019 (Silverado 1500, 1500 Classic, 1500 HD, 1500 HD Classic (LT), 1500 LD, 2500, 2500 HD, 2500 HD Classic, 3500, 3500 Classic, 3500 HD); Dodge 2004–2010 (Ram 1500, 2500, 3500); Ford 2004–2014 (F-150, F-150 Heritage (SVT Lightning)); GMC 2004–2019 (Sierra 1500, 1500 Classic, 1500 HD, 1500 HD Classic, 1500 Limited, 2500 HD, 2500 HD Classic, 3500, 3500 Classic, 3500 HD); Ram 2011–2024 (1500, 1500 Classic, 2500, 3500).
Years vary by model, so check the exact year range for your truck. Trucks outside this list, such as the Toyota Tundra or Nissan Titan, are not covered. Verify year, model and trim before buying.
Installation notes
The rack installs with heavy-duty flat steel brackets and works alongside crossover truck tool boxes, which matters if the bed already carries one. Check the package contents against your installation before starting, including whether drilling is needed.














