Overview
The Rigid Industries 41550 is a black RDS-Series grille kit for the 2015-2016 Ford F-150. It is a full front grille replacement that comes with a 30-inch RDS-Series light bar and security hardware.
The kit also has two independent circuits, two backlit LED rocker switches and an integrated fuse holder. Its curvature follows the original grille, and the factory active shutter system stays in place.
Key features
- Full replacement grille with the factory active shutter system left in place
- Laser-cut stainless steel with black powder-coat finish
- Includes a 30-inch RDS-Series light bar
- Assembled with stainless steel button socket head bolts and Nyloc nuts, no welds
Active shutter and wiring care
Keeping the factory active shutter system working matters for cooling and for fuel economy in many trucks. A full replacement grille like this one leaves that system in place, so the shutters should still open and close normally. Check their movement after installation and confirm nothing rubs or binds against the new grille.
Switches and lights that run from a grille kit should be wired with a fused, protected circuit. Route the cables away from the shutter linkage and the radiator fan, and use loom where they pass through the engine bay. Secure any excess wire so it does not vibrate against the metal.
Stainless steel and black powder coat look good for years, but chips can expose bare metal where stones strike. Touch up chips promptly and recheck the Nyloc nuts after the first few trail runs, since vibration can loosen them over time.
- Check shutter movement after installation
- Use fused wiring for the switch circuit
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 41550 |
| UPC | 849774014024 |
| Material | Laser-cut stainless steel |
| Finish | Black powder-coat |
| Light bar | 30-inch RDS-Series light bar, included |
| Hardware | Stainless steel button socket head bolts, Nyloc nuts and security hardware, included |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 2015-2016 Ford F-150 in King Ranch, Lariat, Limited, Platinum, SSV, XL and XLT trims.
Other F-150 years are not covered by this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is a full replacement that requires no cutting and leaves the factory active shutter system in place. The grille is bolted rather than welded.
What’s included
The grille kit, a 30-inch RDS-Series light bar and security hardware, plus the stainless steel button socket head bolts and Nyloc nuts used for assembly.




















