Overview
The Rigid Industries E/RDS Series Resonance Damper, item number 40280, is a 3-piece set that fits between the heat sink fins of an E-Series or RDS-Series LED light bar. It is universal fit, so it is an accessory for the light bar rather than a vehicle part.
The set reduces the amplitude of mechanical vibration in the bar, including harmonic distortion from the fluted fins at high speeds.
Key features
- Three-piece set
- Slides onto any location between the heat sink fins
- Reduces mechanical vibration in E-Series and RDS-Series bars
- Absorbs harmonic distortion from fluted extruded fins
Vibration and light bar life
Light bars can buzz or rattle when the housing vibrates at speed, especially on rough roads. A resonance damper adds mass and damping between the fins, so the vibration has less room to build. Other sources of noise, such as loose mounts, are worth checking first.
Keeping the bar mount tight is the simplest step. Check bolts after the first few trail runs, then look for fin damage, cracked brackets or cable strain. A damper will not fix a loose mount, and it works best once the bar is solidly fixed to the vehicle.
If the bar is fitted with a damper, keep the fins clean and free of mud so airflow is not blocked. Dust and debris trapped between fins can make the housing run warmer over time.
Specifications
| Brand | Rigid Industries |
|---|---|
| Item number | 40280 |
| UPC | 849774002021 |
| Pieces | 3 |
| Compatible bars | E-Series and RDS-Series LED light bars |
Vehicle fitment
This is universal fit and is not vehicle-specific. Match the set to an E-Series or RDS-Series light bar.
Installation notes
Slide the pieces between the heat sink fins at any open location on the bar. Check the package contents against your installation before starting.
What’s included
A 3-piece resonance damper set.









