Overview
The N-Fab LBM Bumper Mount, part number D0620CMB, is a bolt-on front bumper mount for LED lights on 2006 to 2013 Dodge Ram 2500 and 3500 trucks. It fits within the factory bumper opening, so LED lights can be installed in that opening without cutting, drilling or modifying the bumper.
The mount uses patent-pending Multi-Mount technology, which lets you arrange LED lights in several configurations across the bumper opening, with up to 18 inches of LED light mounting capability. It is designed to hold LED lights from most manufacturers. The welded, one-piece construction has a textured matte black powder coat and is made in the USA.
Key features
- Fits within the factory front bumper opening on 2006 to 2013 Dodge Ram 2500 and 3500 trucks
- Bolts to existing factory hole locations, with no cutting, drilling or modifications
- Patent-pending Multi-Mount technology for multiple LED light configurations
- Mounting capability of up to 18 inches of LED light
- Welded, one-piece construction for strength
- Textured matte black powder coat finish
- Made in the USA
- Backed by a 5-year finish warranty and a lifetime craftsmanship warranty
Bumper LED setup tips
Bumper-mounted LED lights sit in a spot that takes road spray, mud and stone strikes, so protect the connections as carefully as the mount itself. Use weatherproof connectors, route wire behind the bumper along existing lines, and keep it clear of the radiator fan and steering components. Test each light before final tightening so you can adjust the aim without taking the bumper apart again.
A bumper light setup changes the weight and balance at the front of the truck. Check bolt torque after the first few drives, and inspect the mount and the bumper for cracks or loose hardware after rough trails. Aim the lights low enough to light the road ahead without dazzling oncoming drivers.
- Use weatherproof connectors at each light
- Route wire along existing harness lines
- Test each light before final tightening
- Re-check bolts after the first few drives
Specifications
| Brand | N-Fab |
|---|---|
| Part number | D0620CMB |
| UPC | 843206105922 |
| Mount type | Bolt-on front bumper mount for LED lights |
| LED light mounting capability | Up to 18 inches |
| Construction | Welded, one-piece |
| Finish | Textured matte black powder coat |
| Made in | USA |
| Warranty | 5-year finish; lifetime craftsmanship |
Vehicle fitment
It fits 2006 to 2010 Dodge Ram 2500 and 3500 trucks and 2011 to 2013 Ram 2500 and 3500 trucks. Trims include Laramie, SLT, ST, SXT, Sport, Power Wagon, TRX and TRX4 on the 2006 to 2010 models, and Big Horn, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT, ST and Tradesman on the 2011 to 2013 models.
The list does not include Ram 1500 models or 2014 and later Ram 2500 and 3500 trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mount bolts to the factory hole locations in the front bumper, so no cutting, drilling or modifications are needed. Wire LED lights to a fused circuit, ideally through a relay, and check local rules on auxiliary lights before driving on public roads.
What’s included
Check the hardware and parts against your installation plan before starting.
Not included: LED lights. The mount is designed to hold LED lights from most manufacturers.









