Overview
The Rhino-Rack Ski and Snowboard Carrier (part RHO574) is a roof mounted carrier for transporting skis and snowboards. It helps keep the cabin dry and uncluttered by carrying snow gear on the roof.
The carrier has a 500mm (19.5 inches) internal length, which Rhino-Rack gives as enough room for four sets of skis or two snowboards placed back to back. Snap it shut, lock it for protection and the gear stays secured for the drive.
Key features
- Roof mounted carrier for skis or snowboards
- 500mm (19.5 inches) internal length
- Fits four sets of skis or two snowboards back to back
- Snaps shut and locks for protection
- Release mechanism opens and closes with gloved hands
Loading and roof clearance
Skis and snowboards are easiest to load when the tips and tails alternate so the bindings do not catch on each other. Place bases facing the carrier’s padding where possible, and keep the gear centered in the box. Keep heavy items toward the centre to balance the load. Cover sharp edges with a sleeve or tape to protect the carrier’s interior and the other gear inside.
Before driving, check roof clearance at garages, drive-throughs and parking structures, and remember the extra height the loaded carrier adds. Snow and ice can build up on the lid, so clear it before opening the latch. Wipe the carrier and seals after a trip to reduce grit and salt build-up, and store the carrier out of direct sun when it is off the vehicle.
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHO574 |
| Internal length | 500mm (19.5 inches) |
| Mounting | Roof mounted |
| Capacity | Four sets of skis or two snowboards (back to back) |
| Release | Gloved-hand release mechanism |
| Lock | Lockable for protection |
Vehicle fitment
It is universal fit, so it is not built for one make, model or year. Check that your roof rack system and mounting points suit the carrier before ordering.
Universal fit does not confirm a match with every roof rack. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.















