Overview
The Recon 264273BKC is a smoke projector headlight assembly with built-in amber LED turn signals for the 2013-2014 Ford F-150 and Raptor. It reuses the bulbs in your factory OEM projector assembly, whether HID or halogen, so it is designed as a plug-and-play replacement.
It fits 2013-2014 Lariat, King Ranch, Platinum, FX2, FX4 and SVT Raptor trucks that came from the factory with OEM projector headlights. Trucks with other factory headlight types are not covered.
Key features
- Built-in amber LED turn signals
- Smoke-tinted projector housing
- Uses existing factory HID or halogen bulbs
- Plug-and-play installation.
- Supplied as a set
Reusing factory projectors
Reusing a factory projector assembly keeps the original bulbs and wiring in place, so the swap is mostly a matter of housings and connectors. The lens and housing are sealed, and that seal is what keeps moisture from fogging the reflector. Look for condensation or a gap at the edge of the lens before assuming the housing is sound.
Turn signals built into the housing use their own amber LEDs, so check that the flasher and signal wiring match your truck before reconnecting. HID bulbs need the correct ballast and should be handled with the power off. Aim each side on a flat surface after installation, and recheck it after the first few rough drives.
- Check the seal for fog or moisture
- Confirm the signal wiring matches the truck
- Disconnect the battery before connector work
- Re-aim after rough driving
Specifications
| Brand | Recon |
|---|---|
| Part number | 264273BKC |
| UPC | 70000679731 |
| Color | Smoke |
| Type | Headlight assembly with LED |
| Turn signals | Built-in amber LED |
| Bulbs | Existing factory HID or halogen projector bulbs |
Vehicle fitment
It fits 2013-2014 Ford F-150 and Raptor trucks in the Lariat, King Ranch, Platinum, FX2, FX4 and SVT Raptor trims with factory OEM projector headlights.
Trucks without factory projector headlights, and other model years, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plug-and-play wiring means the factory bulbs are reused, so no separate bulbs are needed. Disconnect the battery before working on headlight wiring.
What’s included
A set of headlight assemblies with built-in amber LED turn signals.
Not included: Bulbs, since the headlights use the existing factory bulbs.












