Overview
The Ranch Hand BBD030BLL is a black Legend Series rear bumper for 2003–2008 Dodge Ram 1500 pickups and 2003–2009 Dodge Ram 2500 and 3500 pickups.
It is a frame-mounted, one-piece welded bumper with a body of 4-inch schedule 40 pipe and diamond plate steel. A 2-inch receiver hitch comes standard, rated for a 1000 lb tongue weight and 10000 lb towing capacity. The bumper is lighted, and it replaces the factory rear bumper once the factory receiver is removed.
Key features
- Frame-mounted, one-piece fully welded construction
- Body built from 4-inch schedule 40 pipe and diamond plate steel
- Lighted rear bumper
- 2-inch receiver hitch standard
- Rated for 1000 lb tongue weight and 10000 lb towing capacity
- Black powder coat finish that Ranch Hand describes as corrosion resistant
- Made in the USA
Before you install
A Legend Series bumper replaces the factory rear bumper, so the job starts with removing the factory receiver and the factory bumper hardware. Work with the truck supported safely and keep track of every fastener, since the new bumper relies on its mounting points to carry load. Check that all parts are present before starting, and read the steps closely.
Lights need wiring routed cleanly away from moving parts and heat sources, and the connection should be tested before the trim is refitted. Plan for rear tire clearance and the fit of any D-ring mounts you add, since those mounts are sold separately. After the first few trips, check bolts and welds, and look for loose wiring at the connectors.
- Remove the factory receiver before fitting
- Route bumper wiring away from heat and moving parts
- Test lights before reinstalling trim
- Add D-ring mounts separately if needed
Specifications
| Brand | Ranch Hand |
|---|---|
| Part number | BBD030BLL |
| UPC | 848917002591 |
| Product line | Legend Series |
| Position | Rear |
| Fitment type | Direct fit |
| Material | Steel: 4-inch schedule 40 pipe and diamond plate |
| Finish | Black powder coat |
| Receiver hitch | 2-inch, standard |
| Tongue weight rating | 1000 lb |
| Towing capacity | 10000 lb |
| Lighting | Lighted |
| D-ring mount | Not included |
| Origin | Made in the USA |
Vehicle fitment
The bumper fits 2003–2008 Dodge Ram 1500 pickups and 2003–2009 Dodge Ram 2500 and 3500 pickups. Trims covered on the 1500 are Laramie, SLT, ST, SXT, Sport and TRX4, and Power Wagon is covered on the 2500.
It fits 2003–2008 Dodge Ram 1500 pickups and 2003–2009 Ram 2500 and 3500 pickups. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The factory receiver has to be removed before this bumper goes on. D-ring mounts are not included, so add them separately if you want D-ring recovery points.
What’s included
The bumper, with its standard 2-inch receiver hitch.
Not included: D-ring mounts.









