Overview
The Ranch Hand GGT07HBL1 is a black powder-coated Legend Series grille guard for the 2007–2013 Toyota Tundra. It is a one-piece guard that mounts to the frame and carries a punched grille insert shaped for the Tundra.
Ranch Hand says its Legend guards are fully welded and frame mounted in four locations to eliminate vibration. The guard uses 12 gauge tubing with 5/16 in. uprights and a black powder coat, and Ranch Hand says most applications maintain the factory tow hooks.
The Legend Series guard for the Tundra follows the same construction Ranch Hand uses across the line: one welded piece, 12 gauge tubing, 5/16 in. uprights and a punched insert designed for the truck rather than expanded metal. Four frame mounting locations are used, which Ranch Hand says gives strength and eliminates vibration. The finish is black powder coat, optional extras are a black matte finish and rubber bumper pads on the uprights, and the factory tow hooks can usually be kept.
Key features
- Fully welded one-piece design
- Four-location frame mount
- 12 gauge tubing
- 5/16 in. thick uprights
- Punched grille insert, no expanded metal
- Wrap-around loop
- Black powder coat finish
- Optional black matte finish and rubber bumper pads
- Made in the USA
Tundra front end upkeep
A Tundra front end sees gravel, brush and road spray, so the guard’s finish and mounts take regular exposure. Inspect the powder coat after dirt roads and look for chips that have exposed bare steel. Touch up small spots promptly to keep rust from starting under the finish.
Check the frame attachment points after the first few weeks of use and again after heavy towing. Tighten any hardware that has backed off, and confirm the guard still sits square in front of the grille. A quick inspection each time you wash the truck keeps small issues from becoming larger ones.
- Inspect the finish after dirt roads
- Touch up chips promptly
- Check frame mounts after the first weeks
- Confirm the guard sits square
Specifications
| Brand | Ranch Hand |
|---|---|
| Part number | GGT07HBL1 |
| UPC | 848917000443 |
| Product | Legend Series grille guard |
| Finish | Black powder coat |
| Material | Steel |
| Tubing | 12 gauge |
| Upright thickness | 5/16 in. |
| Construction | One-piece, fully welded |
| Mounting | Frame mounted in four locations, not weld-on |
| Fitment type | Direct fit |
| Country of manufacture | USA |
Vehicle fitment
It fits the 2007–2013 Toyota Tundra.
The 2000–2006 Tundra and the 2014 and newer Tundra are not on the list for this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Tundra guard goes onto the frame at four locations, with no welding to the truck. Look at the tow hook clearance while the guard is loosely fitted, and tighten the mounting hardware only after the guard sits square in front of the grille.
What’s included
A single grille guard with a punched insert for the Tundra grille.
Not included: Optional matte finish and rubber bumper pads.









