Overview
The Ranch Hand GGC881BL1 is a black Legend Series grille guard for 1988–1999 full-size Chevrolet and GMC trucks and SUVs, including the C/K 1500, 2500 and 3500 pickups, Suburban, Blazer, Tahoe, Jimmy and Yukon. It is frame mounted and welded as a single piece.
The guard is one-piece and fully welded, with 12 gauge tubing and 5/16 in. uprights. It mounts to the frame in four locations, which adds strength and reduces vibration. The punched grille insert is shaped to the make and model of the vehicle, and no expanded metal is used. The finish is durable black powder coat, and most applications keep the factory tow hooks.
Key features
- One-piece, fully welded construction
- Frame mounted in four locations to reduce vibration
- 12 gauge tubing
- 5/16 in. thick uprights
- Punched grille insert matched to the vehicle grille
- Wrap-around loop design
- Black powder coat finish
- Options: black matte finish and rubber bumper pads on the uprights
- Made in the USA
Before you buy
A grille guard adds front-end protection, but it also changes how the front of the truck behaves. A heavier guard raises the front weight, so check that the frame mounting points on your truck are clean and solid before installation. Frame-mounted designs like this one are generally easier to remove later than weld-on guards, which matters if you plan to change the front end.
Plan on checking the bolts after the first few trail runs, since brush and rough terrain loosen hardware over time. Look for cracks at the mounting points and any flex in the uprights after hard impacts. Keep the grille area clear so the radiator and headlights get airflow and can be reached for service.
- Confirm the mounting holes line up before tightening hardware
- Recheck fasteners after the first few off-road outings
- Inspect welds and tubing after any strong impact
Specifications
| Brand | Ranch Hand |
|---|---|
| Part number | GGC881BL1 |
| UPC | 848917000238 |
| Product | Legend Series grille guard |
| Finish | Black powder coat |
| Material | Steel |
| Tubing | 12 gauge |
| Upright thickness | 5/16 in. |
| Construction | One-piece, fully welded |
| Mounting | Frame mounted in four locations, not weld-on |
| Fitment type | Direct fit |
| Options | Black matte finish; rubber bumper pads on uprights |
| Country of manufacture | USA |
Vehicle fitment
It fits 1988–1998 C1500, C2500, C3500, K1500, K2500 and K3500 pickups, 1992–1999 Blazer and C/K Suburbans, 1992–1994 S10 Blazer, 1995–1999 Tahoe, and 1988–1991 R and V series trucks. It also fits 1988–1998 GMC C and K pickups, 1992–1999 C/K Suburbans and Yukon, 1995–1999 Jimmy, and 1988–1991 R and V series trucks and Suburbans.
Silverado and Sierra models from the 2000 model year on are not covered by this guard, and the smaller S-series pickups do not fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The guard mounts to the frame rather than being welded to the truck. Most applications keep the factory tow hooks.
What’s included
A single Legend Series guard that includes its punched grille insert.
Not included: Optional matte finish and rubber bumper pads for the uprights.









