Overview
The Ranch Hand Legend Series Grille Guard, part R/HGGF16EBL1, is a black powder coat steel guard for the 2016–2019 Ford Police Interceptor Utility. It is a direct fit, and the guard is made as one fully welded steel unit.
The guard mounts to the frame in four locations, which spreads the load for strength and reduces vibration. The 12 gauge tubing has a 5/16 inch upright thickness. The grille inserts are punched to match the vehicle, so the grille uses no expanded metal.
The Legend Series is built around one fully welded piece of steel, and the Police Interceptor Utility version mounts at four frame points. Most applications keep the factory tow hooks, and the punched grille inserts are made for this specific vehicle.
Key features
- One-piece fully welded construction
- Four frame mounting points
- 12 gauge tubing and 5/16 inch uprights
- Punched grille inserts matched to the vehicle
- Black powder coat finish
Before you install
A front grille guard changes how the front of a vehicle reacts to impact and how air and debris reach the radiator. Before fitting one, look at the bumper area, the frame rails, and any sensors or brackets that sit behind the grille. Mounting points need clean, undamaged metal, and the bolts should be checked against the frame holes before anything is tightened. Because the guard carries weight at the front, confirm that the hood, headlamps and cooling components still open and clear once it is in place.
Owners who add a winch or auxiliary lights often find the front of the truck changes weight and wiring routes, so plan those accessories before the guard goes on. Inspect the powder coat for chips, since bare steel can start to rust at weld seams and frame contact points. After rough trail use, check the four mounting points for loose hardware.
- Check frame mounting points for cracks or rust
- Re-tighten hardware after the first few drives
- Look for coating damage at weld seams
Specifications
| Brand | Ranch Hand |
|---|---|
| Part number | R/HGGF16EBL1 |
| Application | Ford Police Interceptor Utility, 2016–2019 |
| Material | Steel |
| Tubing | 12 gauge |
| Upright thickness | 5/16 inch |
| Finish | Black powder coat |
| Weld-on | Not weld-on |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2016–2019 Ford Police Interceptor Utility as a direct fit.
Ford trucks and SUVs other than the Police Interceptor Utility are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Most applications keep the factory tow hooks. The guard mounts to the frame at four points.
What’s included
Check the included bolts and brackets against your installation before starting.









