Overview
The Pro Comp PXA 44 is a 4.25 in push-through center cap for Pro Comp alloy wheels in bolt codes 83 and 85. It is a replacement cap.
A bolt code, not a vehicle, sets the match for this cap, so check that before fitting it.
Key features
- Push-through style
- 4.25 in size
- Bolt codes 83 and 85
Seating a push-through cap
A push-through cap is pressed into the wheel’s center bore from the front and held by friction or small retaining tabs behind the wheel face. A cap that is seated fully stays flush with the wheel, while one that is only partly in can rattle over bumps or work loose on rough trails.
Removing an old push-through cap usually means working a flat tool around the edge and prying evenly so the retaining tabs do not break. Inspect the bore for dirt, rust or a bent edge before pressing in a new cap, since debris can stop it from seating. Keep a spare cap in the vehicle if you run wheels that are often off-road, because a lost cap leaves the hub exposed.
- Clean the bore before installing
- Press evenly around the edge
- Check that the cap sits flush after the first drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Model | PXA 44 |
| UPC | 844658040663 |
| Style | Push-through |
| Size | 4.25 in |
| Bolt codes | 83, 85 |
Vehicle fitment
Compare the bolt code on your wheel with 83 or 85 before ordering. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One push-through PXA 44 center cap.









