Overview
The Putco 18-inch Direct-Fit Blade LED Tailgate Light Bar in amber, part number PUT9200918-04, is a short blade-style tailgate light bar for Jeep Wrangler JK and JL and for Ram 1500, 2500 and 3500 pickups. The bar is designed to mount on a curved surface or a standard straight mount.
The blade runs on the factory 4-pin harness, which carries the left and right turn signals, reverse, running, brake and hazard over-ride functions. Its LEDs are packed in a dense pattern, so the output reads as one seamless blade of light. The tinted polycarbonate housing is fully encapsulated to keep out moisture, dirt and dust, and resins protect and insulate the circuitry.
Key features
- 18-inch length in amber
- Runs on the factory 4-pin harness
- Left and right turn signals, reverse, running, brake and hazard over-ride functions
- Dense LED pattern for a seamless blade of light
- Tinted polycarbonate housing, fully encapsulated
- Mounts on a curved or straight surface with clips Putco calls patented
Choosing a tailgate bar
A tailgate light bar carries the vehicle’s signals across the width of the tailgate in one strip. Length and color are the first choices, and this blade is built to use the factory harness for its turn, brake and reverse functions. Pick the mounting surface first, since a curved tailgate and a flat one call for different placement.
Because the bar draws its signals from the factory harness, the rest of the rear wiring matters. Upgraded lamps elsewhere on the truck can change the load the harness sees. Inspect the harness connector for corrosion when you install and after heavy washing.
- Check the harness for corrosion
- Match the bar length to the tailgate
- Note the mounting surface before drilling
- Test all signal functions after mounting
Specifications
| Brand | Putco |
|---|---|
| Part number | PUT9200918-04 |
| Length | 18 inches |
| Light color | Amber |
| Harness | Factory 4-pin |
| Housing | Tinted polycarbonate, fully encapsulated |
| Mounting | Curved or straight surface, with clips |
Vehicle fitment
Fits 2009–2017 Jeep Wrangler JK in 2-door and Unlimited 4-door trims such as Rubicon, Sahara, Sport and X, and 2018–2026 Jeep Wrangler JL, including Rubicon, Sport, Willys and Unlimited Moab models. It fits the 2019–2021 Ram 1500 with trims such as Big Horn, Laramie, Rebel and TRX, and the 2020–2026 Ram 2500 and 3500, with Power Wagon among the 2500 trims. Confirm year, model and trim match before ordering.
Earlier Jeep Wrangler JK years and Ram model years outside these ranges are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Choose a curved or straight tailgate surface, since the bar mounts either way with Putco’s clips. The bar is designed to run from the factory 4-pin harness, so its turn, reverse, running, brake and hazard functions depend on that harness being present.
What’s included
The product is the 18-inch amber Blade tailgate light bar.
Not included: Check the mounting parts against your installation before starting.






















