Overview
The Pro Armor Harness Override Clip Connector Plug, part number P/AP151100, is a factory-style plug that closes the seat belt interlock so a side-by-side with a harness can keep running.
The vehicle’s computer interrupts ignition when no seat belt is detected, which works with stock belts but not with a four-point harness. This clip bypasses the factory 15 mph governor when belts are not connected.
Key features
- Factory-style connector that plugs in place of the stock clip
- No wiring skills required
- Bypasses the factory 15 mph governor when belts are not connected
- Designed for use with four-point harnesses
Seat belt interlocks and safety
Seat belt interlocks are designed to stop the machine when belts are not fastened, which matters for drivers and passengers. A harness requires a different arrangement than stock belts, so an override is used only when the belts are actually fastened and secured. Before installing, make sure the harness is properly fitted and that its mounting points are rated for the load.
Keep the factory clip if the machine is run with stock belts, since the override removes the belt-detection shutoff. Inspect the harness buckles and webbing periodically, and replace any worn parts. Connectors should be checked for corrosion or loose pins after mud and water exposure, and any unusual fault codes should be looked at before continuing to ride.
- Use the override only with fastened harnesses
- Reinstall the factory clip for stock belts
- Inspect buckles, webbing and connector pins periodically
Specifications
| Brand | Pro Armor |
|---|---|
| Part number | P/AP151100 |
| Type | Harness override clip connector plug |
| Governor bypass | 15 mph factory governor, when belts are not connected |
| Wiring | None required |
| Connection | Factory-style plug |
Vehicle fitment
It is made for Polaris RZR models from 2015 on and Can-Am models. Confirm the connector matches your vehicle’s factory plug before installing.
Check that the year, model and trim of your machine match the connector before ordering.
Installation notes
Unplug the factory clip and plug this one in; no wiring is needed. Use the override only with harnesses or belts you fasten, since the clip removes the belt-detection shutoff.
What’s included
The override clip connector plug. Seat belts and harnesses are not included.









