Overview
The Prothane Motion Control 1-1102 is a red polyurethane sway bar bushing kit for the front position, fitted to a 15/16 in bar. It is a factory style replacement part with direct fit.
Polyurethane bushings and noise
Polyurethane sway bar bushings are firmer than rubber, so they hold the bar steadier in turns and transmit more road feel through the chassis. That stiffness can also show up as squeaks when the bushing rubs against the bar or bracket. Most squeaks come from dry contact, so clean the bar and bushing surfaces before installing.
Keep the bushing seated square in its bracket and avoid twisting it during installation. Tighten the bracket bolts once the vehicle is at ride height so the bushing is not preloaded. Because polyurethane does not flex as much as rubber, check the end links and mounts for wear at the same time, since the bar’s movement now passes more directly into them. Re-check the bolts after a few drives.
- Lubricate with a grease suited to polyurethane
- Torque bracket bolts at ride height
- Inspect end links at the same time
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 1-1102 |
| UPC | 636169002502 |
| Material | Polyurethane |
| Color | Red |
| Bar diameter | 15/16 in |
| Position | Front |
Vehicle fitment
Direct fit is stated without a year, make or model. Check the front bar diameter and bushing position against your vehicle before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the number of pieces and any hardware against your bar and mounts before starting.









