Overview
The Pro Eagle P/EEXT8 is an 8-inch off-road jack extension that adjusts from 5 to 8 inches. It is made for Pro Eagle jacks and suits most off-road vehicles.
Key features
- Adjusts from 5 to 8 inches
- Recommended for most off-road vehicles
- Made for Pro Eagle jacks
- Needs a floor jack lift pad for use with a current jack
Extension use on the trail
An extension lets a jack reach a lift point on a higher or lower vehicle frame, but the added height moves the load. Plan your lift height before you start so the extension is only extended as far as needed. Set the jack on firm, level ground, seat the extension squarely, and raise the vehicle slowly so the setup can settle before you go under it.
Off-road use puts more stress on a jack setup, so check for mud packed in the threads and for signs of bending at the joint after each trip. Keep the lift pad clean, and use the right pad for your current jack rather than improvising with a loose block of wood.
- Set up on hard, level ground
- Use jack stands before working underneath
- Clean and dry the extension after mud or water exposure
Specifications
| Brand | Pro Eagle |
|---|---|
| Part number | P/EEXT8 |
| Model | EXT8 |
| Product type | Jack extension |
| Adjustment range | 5 to 8 inches |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit extension that works with Pro Eagle jacks. It suits most off-road vehicles, so confirm your jack is a Pro Eagle model before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Other jack brands will not accept this extension. Using it with a current jack requires a separate floor jack lift pad, so plan for that part before use.
What’s included
Plan on a floor jack lift pad as a separate purchase if you use a current jack.









