Overview
The Pro Eagle 3 Ton Big Wheel Off Road Jack, part number P/EORJ3B4X (model ORJ3B4X), is a heavy duty off-road jack built on a 3 ton chassis with solid axles and large non-pneumatic wheels. It is universal fit, but it is a lifting tool rather than a vehicle-specific part, so its 3 ton rating is the figure to check.
The design is called Kratos and was built to stand out from standard jacks. It rolls over sand, zip ties and pebbles in a garage. All jacks in the line now use a black and gunmetal gray finish with black wheels.
Key features
- 3 Ton rating on a 3 ton chassis
- Solid axles
- Large non-pneumatic wheels
- Black and gunmetal gray finish with black wheels
- Built at the Pro Eagle factory as a big wheel jack, not a standard jack
Using a big wheel jack safely
A big wheel jack spreads its load over large non-pneumatic wheels, so it can roll across soft ground where a standard floor jack would sink. Solid axles and a wide base add stability on uneven surfaces, but the lift still has limits. Park on firm, level ground, chock the wheels that stay on the ground, and keep hands and feet clear of the lifting point while the load moves.
Once the vehicle is raised, set it on rated jack stands before any work underneath. Never rely on the jack alone to hold the load. Check the jack before each use for bent axles, loose wheels, cracks in the frame and a worn lifting saddle. Store it dry and clean so the wheels turn freely the next time.
- Inspect wheels and axles before each use
- Lower the load onto stands before working below
- Keep the load under the rated capacity
Specifications
| Brand | Pro Eagle |
|---|---|
| Part number | P/EORJ3B4X |
| Model | ORJ3B4X |
| Rating | 3 Ton |
| Chassis | 3 Ton chassis |
| Axles | Solid |
| Wheels | Large, non-pneumatic |
| Color | Black and gunmetal gray with black wheels |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is named for this jack, and it is not a vehicle-specific part. The fitment field reads universal fit, but a 3 ton jack must suit the weight of the vehicle it lifts, so the rating is the figure to check.
It is a standalone jack, not a bolt-on wheel kit, and it cannot be converted into a standard jack.
Installation notes
Because this is a standalone jack rather than a bolt-on kit, nothing is fitted to the vehicle before use. Keep the load within the 3 ton rating, and support the vehicle on stands before working underneath it.
What’s included
One jack, model ORJ3B4X, is included.

















