Overview
The Pro Comp 68221 is a polyurethane replacement shock absorber bushing. It is a universal fit part, so match the size and style to your shock before buying.
Pro Comp says its polyurethane shock bushings are better than stock bushings. The bushing is meant for a shock that still works but has blown bushings, so the shock itself does not need replacing.
Key features
- Polyurethane material
- Replaces worn or blown shock bushings
- Universal fit label, with no vehicle named
- Polyurethane construction is an alternative to the original rubber style bushing.
Shock bushing replacement
Shock bushings sit at the mounting eyes of the shock and take the movement of the suspension, so wear shows up as clunks, rattles or looseness at the mount. A failed bushing can let the shock move in a way it was not designed for, which speeds wear on the rest of the assembly. Inspect the shock body for oil leaks or dents before deciding that bushings are the only problem.
When fitting new bushings, clean the mount and check the shock eye for wear or corrosion first. Take care to seat the bushing square and tighten the hardware evenly. Polyurethane bushings can feel stiffer in cold weather, so expect some change in feel. Recheck the fasteners after the first few drives and inspect the bushings again at the next service.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 68221 |
| UPC | 614901114201 |
| Type | Shock absorber bushing |
| Material | Polyurethane |
| Fitment | Universal fit label; no vehicle named |
Vehicle fitment
No vehicle is named for this bushing. Fit depends on the shock it goes into, so match the bushing’s size and style to your shock before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check whether the shock is still in good condition before replacing the bushings, since the bushings are a repair part for a shock that still works.
What’s included
The polyurethane shock absorber bushing, part 68221.









