Overview
The Pro Comp 1330017 is a flat black center cap with a 3.30 inch center bore and a Pro Comp logo in the center. It fits wheels with 5×4.5 and 5×5 bolt patterns.
It is a push thru, closed design. Because it is sized to a wheel’s center bore, measure the bore on your wheel and confirm the bolt pattern before ordering. It is not tied to a specific vehicle.
Key features
- 3.30 inch center bore
- Flat black finish
- Pro Comp logo in the center
- 5×4.5 and 5×5 bolt pattern listing
Matching a cap to the hub
A center cap covers the hub at the middle of the wheel and keeps dirt out of the lug area. Its main job is to fit snugly in the center bore, so the first check is always the bore diameter on the wheel itself. A cap that is too small will rattle or pop out over bumps, and one that is too large will not seat at all.
Push thru caps rely on a friction fit rather than clips or screws, so they can be pressed out by hand when a wheel is serviced. Closed designs keep the hub surface hidden, which helps limit grime collecting on the hub. Remove the cap before a brake or bearing job, and inspect the cap for cracks before reinstalling it.
- Measure the center bore before shopping for any cap
- Press the cap in evenly to avoid cracking the edge
- Check for looseness after the first few drives
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 1330017 |
| UPC | 844658031463 |
| Type | Center cap, push thru, closed |
| Center bore | 3.30 in |
| Finish | Flat black |
| Bolt patterns | 5×4.5 and 5×5 |
Vehicle fitment
Check the center bore and bolt pattern against your wheels. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One flat black center cap with the Pro Comp logo.









