Overview
The Power Stop 16-1004 is a set of Z16 Evolution Ceramic Clean Ride Scorched brake pads designed as an upgrade for the stock caliper.
The Z16 Evolution Scorched pads pair a ceramic friction formula with dual-layer rubber shims, and the surfaces are thermally scorched so they bed in quickly.
The dual rubber-backed shims are designed to reduce noise compared with plain steel shims.
Key features
- Upgrade pad for the stock caliper; axle position not stated
- Surfaces are thermal scorched so the pads bed in quickly
- Shims have two rubber layers bonded over constrained steel to cut noise
- OE-style positive mold process keeps friction density even
- Low dust ceramic formula that keeps wheels cleaner
- Built to OEM specifications with chamfers and slots, under TS16949 standards
Bedding and break-in
Scorched pads are built to transfer an even layer of friction material to the rotor during the first stops. Make a series of moderate stops from moderate speed, then let the brakes cool before heavy use. Avoid holding the pedal down at a stop right after install, since that can leave uneven deposits.
Ceramic compounds are generally quieter and produce less dust than semi-metallic pads, which suits daily driving. They work less aggressively when cold, so expect a firm pedal feel only after several stops. Pairing new pads with fresh or resurfaced rotors gives the most consistent results.
Replace pads when the friction material wears thin, when a squeal or grinding sound appears, or when the pedal pulses. Inspect the shims and slide pins at each change, and apply a light coat of high-temperature caliper grease where the shims contact the caliper bracket.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | 16-1004 |
| UPC | 792088503121 |
| Product line | Z16 Evolution Ceramic Clean Ride Scorched |
| Caliper | Stock |
| Type | Upgrade |
| Friction material | Carbon-ceramic |
| Shims | Dual rubber layers over constrained steel |
Vehicle fitment
Confirm fit for your vehicle’s year, model, trim and axle position before ordering.
Confirm the vehicle and the front or rear position before installing this part number. Check your vehicle’s year, model and trim before ordering.
Installation notes
Power Stop lists these pads for the stock caliper. Replace the pads on both wheels of an axle together.









