Overview
The Power Stop 16-1640 is a Z16 Evolution ceramic Clean Ride scorched brake pad with dual rubber backed shims for quieter braking. It is marked as a direct fit, but no make, model or year range is named, so check your vehicle before ordering.
Thermal scorching prepares the pad surfaces for a quick break-in. The carbon-ceramic compound is formed with positive mold technology for even friction density, and the pad is made under TS16949 standards to OEM specifications.
Key features
- Carbon-ceramic compound that Power Stop says keeps wheels cleaner
- Dual rubber backed shims
- Thermal scorched pad surfaces for fast break-in
- Chamfers and slots included
- Manufactured under TS16949 standards to OEM specifications
Choosing ceramic pads
Ceramic compounds are often chosen for street use where quiet operation and low visible dust matter. They run more evenly than many organic pads, but they usually need a few moderate stops to transfer an even layer onto the rotor before full pressure is applied.
Shim choice affects noise as much as the pad itself. Rubber backed shims absorb vibration between the pad and the caliper bracket, so check that the shims are reinstalled in the correct orientation. Pair new pads with a rotor in good condition, since a worn or glazed surface can cause pulsing and noise regardless of compound.
- Clean the caliper bracket before fitting new shims
- Replace rotors that are below minimum thickness
- Use brake lubricant on sliding pins only
Specifications
| Brand | Power Stop |
|---|---|
| Part number | 16-1640 |
| UPC | 792088833532 |
| Product line | Z16 Evolution Clean Ride |
| Compound | Carbon-ceramic |
| Shims | Dual rubber backed |
| Surface | Thermal scorched |
| Standard | TS16949 |
Vehicle fitment
No make, model, year range or chassis code is named for this pad set. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Brake pads with dual rubber backed shims. Check the package contents against your installation before starting.









