Overview
The Power Stop S4918A is a front pair of powder-coated performance brake calipers for 2007–2016 Cadillac Escalade, Chevrolet Silverado 1500, Suburban, Tahoe, Avalanche, GMC Sierra 1500 and Yukon models. The set holds one left and one right caliper.
These calipers are built for enthusiasts and bolt directly in place of the stock units. Each caliper and bracket is remanufactured in the USA and finished in a high-temperature red powder coat. New premium boots and seals are fitted, with silicone lubricant on the pins and abutment clips where applicable. The set covers a decade of full-size GM trucks and SUVs, so match your model, year and axle before ordering.
Key features
- Front pair with left and right calipers
- Bolts directly in place of stock calipers.
- Remanufactured in the USA
- High-temperature red powder coat
- New premium boots and seals
- High-temperature silicone on the caliper pins
- Premium abutment clips where applicable
- Fitment across Cadillac, Chevrolet and GMC full-size models
Before you buy
A brake caliper holds the piston that presses the pads against the rotor, so its condition shapes how evenly a full-size truck stops. On GM trucks and SUVs the front calipers do much of the work, and one that sticks can drag, overheat the rotor and wear pads unevenly. Replacing calipers in pairs keeps both front wheels responding the same way under braking.
Before ordering, match the caliper to the axle and side, and check whether the bracket comes with the caliper or must be reused. Brake hoses, rotors and pads are often inspected at the same time, since a worn rotor shortens the life of new pads. Keep the slide pins clean and lubricated during service, and use fresh brake fluid whenever the system is opened.
- Check brake hoses for cracks, bulges or seepage
- Measure rotor thickness against the minimum stamped on it
- Look for uneven pad wear that points to a sticking caliper
Specifications
| Brand | Power Stop |
|---|---|
| Part number | S4918A |
| UPC | 792088815248 |
| Part type | Performance brake calipers |
| Position | Front |
| Set contents | 1 left caliper and 1 right caliper |
| Finish | High-temperature red powder coat |
| Remanufactured in | USA |
| Fit type | Direct fit |
Vehicle fitment
The S4918A fits: 2008–2016 Cadillac Escalade; 2008–2016 Escalade ESV; 2008–2013 Escalade EXT; 2008–2013 Chevrolet Avalanche; 2007–2016 Silverado 1500; 2007 Silverado 1500 Classic; 2015–2016 Suburban; 2008–2014 Suburban 1500; 2016 Suburban 3500 HD; 2008–2016 Tahoe; 2007–2016 GMC Sierra 1500; 2008–2016 Yukon; 2015–2016 Yukon XL; and 2014 Yukon XL 1500.
Years differ by model: the Silverado 1500 starts at 2007 while the Escalade starts at 2008, and the Yukon XL is listed only for 2014 and 2015–2016. Confirm your model year exactly. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The S4918A calipers bolt directly in place of the stock calipers. Inspect the front rotors and pads while the system is open, bleed the brakes after the swap, and confirm a firm pedal before driving.
What’s included
- Front left caliper and front right caliper
- Caliper brackets, remanufactured along with the calipers
- New premium boots and seals
- High-temperature silicone lubricant for the pins
- Premium abutment clips where applicable
Not included: pads, rotors, brake fluid and other hardware not named above.









