Overview
The Oracle Lighting LED Surface Mount Fog Light Halo Kit (White), part number 1215-001, is a waterproof halo kit that attaches to the outside of the fog light lens rather than inside the housing. It fits the 2007-2018 Jeep Wrangler JK and the 2018-2021 Jeep Wrangler JL in several trims.
The halo rings are surface mount units rated IP67 and encased in a polymer resin, so they can operate even when submerged. They attach to the lens with a patent-pending system and an adhesion promoter pad, and the kit includes two quick connect wiring adapters and two wide voltage external LED drivers.
The surface mount design needs no removal of the fog lights, no baking and no cutting of the lights. Each halo runs on bright LEDs that consume less power, and the controllers let you change the color.
Key features
- IP67 waterproof surface mount halo rings
- Attaches to the exterior of the fog light lens
- Patent-pending attachment system
- Two wide voltage external LED drivers
- Two quick connect wiring adapters
- Adhesion promoter pad included
- 1 year warranty
Mounting and lens care
Because the rings sit on the outside of the lens, the lens surface matters. Clean it with a mild soap and water, then dry it before applying the adhesion promoter pad. Dust, wax or oil on the lens can stop the attachment system from holding, so avoid cleaning products that leave a film.
Surface mounted halos are exposed to road debris, so check the rings and their seal after rough trail use or a car wash. A loose edge or a cracked resin shell should be dealt with before the next drive, since water can reach the connections. Keep the quick connect adapters clear of the fog light housing to avoid strain on the wires.
- Clean the lens and dry it before mounting
- Check ring edges after rough trail use
- Keep quick connect adapters free of strain
- Replace a cracked ring rather than sealing it
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 1215-001 |
| Halo color | White |
| Mount | Surface mount, attaches to the lens |
| Waterproof rating | IP67 |
| Included | Two halo rings, two quick connect adapters, two LED drivers, adhesion promoter pad |
| Compatibility | Models with factory LED lights |
| Warranty | 1 year |
Vehicle fitment
It is a direct fit for the 2007-2018 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and for the 2018-2021 Jeep Wrangler (JL) in several trims, including the 4xe versions.
It suits models with factory LED lights, so check your fog lights before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rings attach to the outside of the lens using the adhesion promoter pad and the patent-pending system. The quick connect adapters and wide voltage drivers handle the wiring, so follow the included instructions for lens preparation.
What’s included
Two IP67 surface mount halo rings, two quick connect wiring adapters, two wide voltage external LED drivers and an adhesion promoter pad.



























