Overview
The Omix-ADA 19106.02 is a wiper motor switch for non-intermittent wipers. It has 7 prongs on the rear of the switch.
It works like the original switch with the pump position.
Key features
- Made for non-intermittent wipers
- 7 prongs on the rear of the switch
- Functions like the original switch with the pump position
- It installs in the front location.
Intermittent and non-intermittent systems
Wiper systems come in intermittent and non-intermittent designs. A non-intermittent system runs the wipers continuously at the selected speed, while an intermittent system adds timed pauses between sweeps. The two use different control logic, so a switch made for one type will not give the right behavior on the other.
The pump position on the switch is used to run the washer and wipers together. Before removing the old switch, mark the prong order and the position of each wire. That record makes it easier to confirm that the new switch is wired the same way.
- Confirm the wiper type before ordering
- Test the switch on the bench if the harness is accessible
- Check the wiper motor ground for corrosion
Specifications
| Brand | Omix-ADA |
|---|---|
| UPC | 804314038182 |
| Wiper type | Non-intermittent |
| Prongs | 7 on the rear of the switch |
| Position | Front |
Vehicle fitment
Its fit depends on your vehicle’s year, model and trim. It is made for non-intermittent wipers, so confirm your wiper system type before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the 7 prong count and layout on the rear of the switch to your wiring before fitting. The switch is designed for non-intermittent wipers, so confirm your wiper system is that type.
What’s included
Wiper motor switch with 7 prongs on the rear.









