Overview
The Omix-Ada windshield washer bottle pump kit, part 19108.01, is a replacement washer pump kit for the Jeep Cherokee (XJ). It covers a front washer kit for 1984 to 1990 XJ Cherokee models and a rear washer kit for 1987 to 1996 XJ Cherokee models.
When the windshield washer pump fails, the glass cannot be cleaned with fluid, so wiping by hand is the only alternative. This kit is a factory replacement washer pump for the XJ Cherokee.
Key features
- Factory replacement washer pump kit
- Front washer kit for XJ Cherokee, 1984 to 1990
- Rear washer kit for XJ Cherokee, 1987 to 1996
- Omix-Ada part 19108.01, UPC 804314039905
Washer pump and reservoir care
A washer pump draws fluid from the reservoir and pushes it through hoses to the nozzles. When the pump motor runs but no fluid reaches the glass, the cause is often a clogged nozzle, a kinked hose or a loose connection rather than the pump itself. Check those points before replacing the pump.
Keep the reservoir filled with washer fluid and check it for cracks around the mounting points, since a leak can run the level down and let the pump run dry. Fluid left in the lines through winter can freeze and damage the pump, so use a fluid rated for the climate.
- Check the fuse and wiring when the pump stays silent
- Clear the nozzles with a fine pin
- Inspect hoses for cracks and kinks
- Keep the reservoir free of sediment
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 19108.01 |
| UPC | 804314039905 |
| Type | Windshield washer bottle pump kit |
| Front washer kit application | XJ Cherokee, 1984 to 1990 |
| Rear washer kit application | XJ Cherokee, 1987 to 1996 |
| Fit type | Direct fit |
Vehicle fitment
Based on its application, this kit fits the Jeep Cherokee (XJ), 1984 to 1996. The front washer kit covers 1984 to 1990 and the rear washer kit covers 1987 to 1996.
The front washer kit applies to 1984 to 1990 only. Confirm your year, model and trim before ordering.
What’s included
A windshield washer bottle pump kit. Check the package contents against your installation before starting.














