Overview
The Omix-Ada 12029.06 is a windshield hinge screw for the Jeep CJ7 (1976–1986), Scrambler (1981–1985) and Wrangler YJ (1987–1995). It is a direct OE replacement built to original specifications.
The screw has a tapered head that sits flush in the hinge and is driven with a torque bit. The part carries a limited five year warranty from Omix-Ada.
Key features
- Tapered head that sits flush in the hinge
- Torque bit fastener
- 16 screws are required.
- Direct OE replacement built to original specifications
Tightening and hinge alignment
Hinge screws carry the weight of the windshield frame’s hinge, so they need to seat evenly. Start each screw by hand to avoid cross-threading, then tighten in stages so the hinge sits square against the frame. A torque bit helps keep pressure centered in the head.
Stripped or damaged heads can be removed with a suitable extractor, and a replacement fastener should match the original length and thread. Inspect the screws during routine checks, looking for heads that have rounded out, threads that are rusted or any sign the hinge has shifted. Retighten the set after the first few drives, since fasteners can settle.
- Start every screw by hand
- Tighten in stages across the hinge
- Replace any screw with a rounded or damaged head
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 12029.06 |
| UPC | 804314028749 |
| Drive type | Torque bit |
| Head | Tapered |
| Quantity required | 16 |
| Warranty | Limited five year warranty from Omix-Ada |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade), the 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR) and the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
Later Wrangler generations such as TJ and JK are not covered. Verify the year, model and trim against your vehicle before buying.
Installation notes
Plan for 16 screws, since the product note says 16 are required, and use a torque bit that matches the drive. The tapered head is designed to sit flush in the hinge, so check that each screw seats flush before closing the hinge.
What’s included
The windshield hinge screw, part number 12029.06, is the item supplied. Sixteen screws are needed, so count the set before starting.









