Overview
The Omix-Ada 12403.06 is a chrome passenger side (right) tail light assembly for 1976–1980 Jeep CJ5 and CJ7 models. It is a replacement for the factory type and arrives as a complete kit with housing, lens and bulbs.
The kit has a 12 wire lead connector. The listed dimensions are 5-3/4 wide by 6-3/4 wide by 3 deep, so compare them with the existing opening before fitting the assembly.
Key features
- Chrome finish on the passenger side
- Complete kit with housing, lens and bulbs
- 12 wire lead connector for the vehicle harness
- Replacement for the factory type lamp
Chrome lamp care and mounting
Chrome trim on a tail lamp takes sun and road grime every day, and plating can dull if it is left dirty. Clean the chrome with mild soap and water, dry it fully, and avoid harsh abrasives that scratch the surface. A light coat of protectant applied once in a while keeps the finish looking sharp between washes.
When mounting a complete assembly, the gasket and the mounting surface matter more than the fasteners. Make sure the gasket sits flat and the housing seats evenly before tightening, since an uneven fit lets water collect inside the lens. Check the connector plug for corrosion before it is pushed home.
- Wash chrome with mild soap and a soft cloth
- Avoid steel wool and harsh abrasives on the plating
- Seat the gasket flat before tightening the fasteners
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 12403.06 |
| UPC | 804314141851 |
| Position | Right (passenger side) |
| Finish | Chrome |
| Connector | 12 wire lead |
| Dimensions | 5-3/4 wide by 6-3/4 wide by 3 deep |
Vehicle fitment
It fits 1976–1980 Jeep CJ5 (Base, Golden Eagle, Laredo and Renegade) and 1976–1980 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo and Renegade).
Confirm fit for your vehicle’s year, model and trim before ordering. The fitment covers 1976–1980 CJ5 and CJ7 models only.
Installation notes
Check the 12 wire lead connector against your vehicle’s harness before mounting, since that plug is the electrical connection point for the assembly.
What’s included
Housing, lens, bulbs and a 12 wire lead connector.
Not included: no separate mounting hardware is listed.









