Overview
The Omix-ADA amber side marker light, part number 12401.07, is the driver side unit. It requires a 2-lug type wire connector, so inspect the original connector and lens before fitting it. Confirm the vehicle year, model and chassis before ordering.
Key features
- Amber lens
- Driver side position
- Side marker light
- Requires a 2-lug type wire connector
Driver side marker lights
A driver side marker light marks the edge of the vehicle at the side, helping other drivers judge its length in low light. It runs on the same circuit as the other marker lights, so a fault on one lamp can point to a problem in the wiring rather than the lamp itself. Start by checking the connector and fuse before replacing a working lamp.
Matching the connector is the first fit check. A 2-lug type plug must line up with the harness, and any adapter or substitute plug should be confirmed for fit and function first. Inspect the lens for cracks, and look for moisture inside the housing, which signals a failed seal. Replace the seal when fitting a new lamp so water stays out.
- Check the fuse before replacing the lamp
- Compare the plug shape with the harness
- Replace any seal that is hardened or split
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 12401.07 |
| UPC | 804314142896 |
| Lens | Amber |
| Position | Driver side |
| Connector | 2-lug type wire connector |
Vehicle fitment
Fit depends on your vehicle’s year, model and chassis, so match them to this driver side light before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the driver side connector is a 2-lug type before fitting.
What’s included
One driver side marker light. Plan for bulbs, wiring or hardware separately if your installation needs them.
















