Overview
The Omix-ADA 17115.01 is a 3 inch radiator hose clamp for universal application. It is made for radiator hoses.
The clamp is 3 inch in size. Confirm the clamp size suits your hose diameter before tightening.
Key features
- 3 inch hose clamp
- Radiator hose clamp
- Universal application
- Five year limited warranty from Omix-ADA
Choosing a hose clamp size
A hose clamp has to seat evenly over the hose and grip it without cutting into the rubber. Clamp style and size matter because the band must fit the hose diameter and the tightening screw must reach the fitting. Radiator hoses go through heat cycles, so the clamp has to hold its tension as the hose expands and contracts.
Measure the hose diameter at the spot where the clamp will sit, and compare it with the clamp range before buying. When replacing a clamp, look for a band that is not bent or corroded, and retighten it after the first few heat cycles. Replace clamps together with the hose when the rubber has cracked or hardened.
- Measure hose diameter at the clamp position
- Avoid overtightening into soft hose
- Recheck clamp tension after the first drive
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17115.01 |
| UPC | 804314000912 |
| Clamp size | 3 inch |
| Application | Radiator hose, universal application |
Vehicle fitment
Confirm the 3 inch clamp suits your hose diameter before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the 3 inch clamp matches the hose diameter before tightening it.
What’s included
The package is one clamp.









