Overview
The Omix-ADA 18676.24 is a set of shift arm pads for the NP231 transfer case. Omix-ADA makes the pads to the factory’s original specification, and the fit type is direct fit. No vehicle years or models are given for these pads.
Confirm the transfer case is an NP231 and compare the part number with the pad you removed before you order.
Key features
- Shift arm pads for the NP231 transfer case
- Made by Omix-ADA to the factory’s original specification
- Covered by a limited five year warranty from the manufacturer
- Part number 18676.24 with UPC 804314003272
Shift arm wear and pad care
Shift arm pads cushion the contact between the shift arm and the shift rail or fork, reducing metal-on-metal wear as gears are selected. Over time they compress, crack, or flatten, which can make shifts feel vague or cause rattling in the lever. Pads should sit flat and fully seated with no free movement.
Pad replacement is usually done while the shift linkage is open, so inspect the rails, detents and springs at the same time. Worn pads often come with worn shift arm bushings. Clean all mating surfaces before fitting and use the lubricant the NP231 requires.
- Check pad faces for flattening or cracks
- Look for wear marks on the contact area
- Keep the pad area free of grit during reassembly
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18676.24 |
| UPC | 804314003272 |
| Component | Shift arm pads |
| Compatible transfer case | NP231 |
| Fit type | Direct fit |
| Warranty | Limited five year warranty |
Vehicle fitment
Only the NP231 transfer case is named, not vehicles. Check that your transfer case is an NP231 before ordering rather than relying on the direct fit label alone.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Shift arm pads, Omix-ADA part number 18676.24. No quantity is stated.














