Overview
The Crown Automotive 4338920 is an NP231 shift mode fork, a preassembled unit with a shift shaft and nylon shift fork inserts. It is named for the 1994-96 Jeep Wrangler YJs, and for those years it fits only serial #53008210 among the transfer case numbers named.
Key features
- Preassembled with shift fork, shift shaft and nylon shift fork inserts
- Shaft 5/8 in diameter and 10-1/4 long
- Fork 4-1/2 inside diameter
- Works with the transfer case numbers listed in the specifications
Shift fork wear and inspection
A shift mode fork moves the sliding sleeve that selects between high and low range, so its condition affects how smoothly the transfer case changes modes. The nylon inserts that ride in the fork wear over time, and worn inserts can make shifting feel stiff, cause a grinding or chatter, or allow the lever to slip out of position. Checking these signs before the fork fails completely can save a difficult roadside repair.
Before fitting a shift fork, confirm the transfer case serial number and make sure the shaft and fork lie square with the shift rail. Inspect the transfer case shift rail and sleeve for scoring, since a new fork will wear quickly against a damaged surface. Work with the vehicle supported securely, and cycle the lever through all positions after installation with the engine off to confirm smooth movement.
- Look for scoring on the sleeve and rail
- Check that the inserts sit fully in the fork
- Test each shift position before driving
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4338920 |
| UPC | 848399003437 |
| Part type | NP231 shift mode fork |
| Shaft diameter | 5/8 in |
| Shaft length | 10-1/4 long |
| Fork inside diameter | 4-1/2 |
| Transfer case numbers | 53008207, 52097533, 53008209, 52097522, 53008211, 52097524, 53008212, 52097523, 53008210 |
| Serial restriction (1994-96 YJs) | Serial #53008210 only |
Vehicle fitment
This fork is for Jeep Wrangler (YJ) vehicles from 1994 to 96. For those years only serial #53008210 is covered, so check your transfer case serial number before ordering.
Later Wrangler generations are not covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The fork arrives preassembled with its shift shaft and nylon inserts, so check the transfer case serial number before fitting it. Work with the vehicle supported securely on stands.
What’s included
The fork comes preassembled with the shift fork, shift shaft and nylon shift fork inserts. No other parts are included.












