Overview
The Omix-ADA 16527.04 is a Dana 30 inner axle dust shield for the 1972–1976 Jeep CJ5, the 1972–1975 Jeep CJ6 and the 1976 Jeep CJ7. It fits either the driver or passenger side.
It is a direct OE replacement built to the original specifications, and it carries a limited five year warranty.
Key features
- Inner dust shield for a Dana 30 axle
- Works on the driver or passenger side
- Direct OE replacement built to original specifications
- Limited five year warranty.
Inspecting the axle area
An inner dust shield keeps road grit and water away from the inboard side of the axle, where seals and bearings are most exposed. When the shield is bent or missing, debris can work into the housing and shorten the life of the parts behind it.
Inspection is easiest when the wheel and brake components are off. Look for bent metal, cracks, or gaps where the shield meets the housing. Grease or dirt on the brake components can also show that the shield is no longer doing its job.
If the axle is already apart for service, check the seal and bearing condition at the same time. Replacing a damaged shield at that point avoids repeat work and keeps debris from reaching the brake parts.
- Look for bent or cracked metal
- Check the gap where the shield meets the housing
- Inspect seals when the axle is opened
- Keep grease off the brake components
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16527.04 |
| UPC | 804314042257 |
| Product type | Inner axle dust shield |
| Axle | Dana 30 |
| Side | Driver or passenger |
| Fit type | Direct fit |
| Warranty | Limited five year warranty. |
Vehicle fitment
It fits the 1972–1976 Jeep CJ5, the 1972–1975 CJ6 and the 1976 CJ7.
The fit covers 1976 for the CJ7 only. The Dana 30 outer shield is a separate part, so confirm your year, model and trim before buying.














