Overview
The Omix-ADA 17709.05 is a natural finish fuel pump for the 2.5L GM 4-cylinder engine in the 1980–1983 Jeep CJ5 and CJ7 and the 1981–1983 Jeep Scrambler. It is a direct fit with stock flow and pressure ratings.
Fitment is listed by trim for each model, including Base, Golden Eagle, Laredo, Limited and Renegade for the CJ5, and Base, Golden Hawk, Laredo, Limited and Renegade for the CJ7.
Key features
- Natural finish
- Direct fit with stock flow and pressure ratings
- Application: 2.5L GM 4-cylinder engine
- Covers CJ5, CJ7 and Scrambler models
Care for mechanical pumps
Fuel pumps on this engine family sit in a warm, dusty spot near the block, and their diaphragms can harden with age. A pump that delivers too little pressure may cause hesitation under load, while one that leaks at the diaphragm can wet the engine block. Look for fuel at the pump body or weep hole, and note any change in starting behavior, since these symptoms often appear before a pump fails outright.
When the pump is out, check the actuating arm and the cam eccentric it rides on. Wear there can reduce output even with a new pump. Clean the block surface, use new gaskets, and check the inlet and outlet lines for cracks. Keep the area clear of heat sources and open flame while the fuel system is disconnected.
- Look for fuel at the pump body or weep hole
- Inspect the actuating arm and cam eccentric
- Clean the block surface before mounting
- Check inlet and outlet lines for cracks
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17709.05 |
| UPC | 804314046057 |
| Finish | Natural |
| Pump type | Mechanical |
| Engine application | 2.5L GM 4-cylinder |
| Flow rating | Stock |
| Pressure rating | Stock |
| Fitment designation | Direct fit |
Vehicle fitment
It fits 1980–1983 CJ5 and CJ7 models and 1981–1983 Scrambler models in their trims.
Years outside these ranges are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
This is one natural finish fuel pump. Check gaskets and mounting hardware against your installation before starting.









