Overview
The Omix-Ada 17246.01 is a direct OE replacement distributor rotor for the 4 cylinder 134 engine with a 6-volt system. It is built to original specifications and carries a limited five year warranty.
The rotor is direct fit for the 4 cylinder 134 engine, but no vehicle year, model or chassis code is named. Confirm your original rotor’s part number before ordering.
Key features
- Direct OE replacement design
- Built to original specifications.
- Limited five year warranty.
- Made for the 4 cylinder 134 engine with a 6-volt system.
Rotor fit and wear
The rotor sits on top of the distributor shaft and carries high-voltage current from the center of the cap to the terminals as it turns. Its tip must line up with the cap terminals and sit firmly on the shaft, so a rotor that is even slightly loose can cause misfire or uneven spark.
Systems on 6-volt wiring tend to need closer attention to wiring and connections, since older components can be less forgiving of resistance. Check the rotor tip for burning, the body for cracks, and the metal contact for corrosion. Clean the cap and terminals when the rotor is changed, and make sure the shaft turns freely before reassembly.
- Check the rotor tip for burning
- Look for cracks in the rotor body
- Clean the cap terminals when fitting a new rotor
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17246.01 |
| UPC | 804314066574 |
| Component | Distributor rotor |
| Engine | 4 cylinder 134 |
| Voltage | 6-volt |
| Warranty | Limited five year warranty. |
| Fitment | Direct Fit |
Vehicle fitment
Direct fit for the 4 cylinder 134 engine. Compare the part number with your original rotor, as no vehicle year, model or chassis code is given.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Seat the rotor fully on the distributor shaft before refitting the cap, and check the tab alignment against your old rotor. Disconnect the battery before working on the ignition.
What’s included
This item is the rotor. Plan separately for a cap, gasket and hardware if they are needed.









