Overview
The Omix-Ada 17733.02 is a direct OE replacement accelerator pedal for 4 cylinder Jeep and Willys CJ models. It fits CJ3, CJ5 and CJ6 Base models across several model years from 1953 to 1971.
It is built to original specifications and carries a limited five year warranty. Its alternate part number is OAI17733.02.
Key features
- Direct OE replacement built to original specifications
- Built for 4 cylinder engine applications
- Covers CJ3, CJ5 and CJ6 Jeep models and Willys CJ-3, CJ-5 and CJ-6 models
- Carries a five year limited warranty
Four-cylinder pedal basics
The accelerator pedal sends motion through a linkage to the throttle, and on a 4 cylinder Jeep that linkage is usually simple and easy to inspect. A pedal that returns cleanly and sits at a consistent height makes throttle control steadier on rough trails and in traffic. Start any check by working the pedal by hand with the engine off.
Look for worn pivots, a weak return spring and any binding in the linkage. Clean and lubricate the moving points, then confirm the throttle closes fully when the pedal is released. If the pedal feels heavier on one side, check the mounting bracket for bends or loose fasteners before blaming the pedal itself.
- Work the pedal by hand with the engine off
- Check the return spring and pivot
- Confirm the throttle closes fully
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17733.02 (also OAI17733.02) |
| Engine | 4 cylinder |
| Fit | Direct fit |
| Warranty | Five year limited warranty |
Vehicle fitment
It fits 1959–1960 Jeep CJ3 (Base), 1959–1960 and 1968–1971 Jeep CJ5 and CJ6 (Base), 1953–1958 Willys CJ-3, 1955–1958 Willys CJ-5 and 1956–1958 Willys CJ-6.
Years between these ranges, Wrangler models and later CJ models are not covered. Verify the year, model and trim before you buy.
What’s included
It is the pedal and part number only, with no other pieces included. Compare the contents with your installation before starting.









